|
|
|
|
|
|
|
|
|
|
|
|
|
RUDEDOG USA 5006 - Lock Collar & Grommett 7/8" Round Bar
"If you have a 7/8" Round Sleever Bar, this should be the last stopper you need to hold your bar in your holder. Fits most 7/8" dia. round sleever bar. Tighten down with a 5/32" hex wrench. Wet the inside of grommet for easy positioning up the bar. These do come standard on our Sleever Bar #7878Z
Made in the USA."
|
RUDEDOG USA 5005 - Lock Collar & Grommett 3/4" Round Bar
"If you have a 3/4" Round Sleever Bar, this should be the last stopper you need to hold your bar in your holder. Fits most 3/4" dia. round sleever bar. Tighten down with a 5/32" hex wrench. Wet the inside of grommet for easy positioning up the bar.
Made in the USA."
Part #5005 UPC #
Weight: .25 lb Width: 1.25" Length: 1.25" Depth: 1.5"
|
RUDEDOG USA 5004 - Lock Collar & Grommett Size 7/8" Hex Fit a 7/8" Hex sleever Bar
"If you have a 7/8" Hex Sleever Bar, this should be the last stopper you need to hold your bar in your holder. Fits most 7/8" dia. Hex sleever bar. Tighten down with a 5/32" hex wrench. Wet the inside of grommet for easy positioning up the bar. These do come standard on our Sleever Bar #7730Z
Made in the USA."
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RUDEDOG USA 5003 - Lock Collar & Grommett 3/4" Hex Bar
*** Free Shipping Cost in US ****
"If you have a 3/4" Hex Sleever Bar, this should be the last stopper you need to hold your bar in your holder. Fits most 3/4" dia. Hex sleever bar. Tighten down with a 5/32" hex wrench. Wet the inside of grommet for easy positioning up the bar.
Made in the USA."
|
RUDEDOG USA 5012 - 'Milkers' for Pliers - Rudedog USA****** Free Shipping Cost in US ********
New 'Milker' cushion grips soften the pliers handle that is against the palm of your hand and eases the hand strain of tying rebar. Two milkers in each package Made in the USA
|
*********** Free Shipping Cost in US ***************
RUDEDOG USA 3007 - The Clip - Snap Loop
"This a great snap loop made from Black Harness Leather. The Harness Leather is more resistant to the elements and will not stretch out as quickly. Handmade leather loop with a large clip-hook at the bottom. Rudedog's large leather snap loop is awesome for any tool that you can hang. Guys on the job use'em for adjustable wrenches, flint strikers, keys, even something like safety glasses when not in use.
Made in the USA!!!"
Weight: .2 lb Width: 1.5" Length: 8" Depth: 1.5"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RUDEDOG USA 5007 - Bolt-On Sleever Bar Holder
****** Free Shipping Cost in US ********
"New improved! Handmade bolt on sleever bar holder for your erection wrench holder. Redesigned with 3 (instead of 2) bolts. Bolts are 3/4" long to bolt through thicker holders. Locknuts on back. Hole is 1" for up to 7/8 sleever bars, round and hex bars.
Made in the USA!!!"
|
RUDEDOG USA 3006 Spud Wrench Holder - Metal Ring
"This is our "Ring" made from Black Harness Leather. The Harness Leather is more resistant to the elements. Ideal for 1" spudsand Adjustable Spuds! Anyone that has had to carry a 1" hard (1 5/8" opening) spud around very long realizes that most erection wrench holders are not made to handle it. Usually the holes stretch to the point that the holder isn't any good for the standard 3/4" & 7/8" spuds anymore, plus it focuses all the weight on one side of your belt. I designed this to handle the problem and allows you to wear it wherever you'd like. Just drop the spud in the ring, and be the envy of every kid on the block! Can be used with any tool that you can slide into the ring (Hammer, Beater, Adjustable Wrench). If you don't have one of these on your belt, you are missing the best tool holder out there.
Made in the USA!"
|
RUDEDOG USA # 3001 Single Leather Spud Wrench Holder With Tunnel Loop - Leather construction
- Tool Holders made from Black Harness Leather. The Harness Leather is more resistant to the elements.
- Tunnel loop on
Made in the USA!"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*********** Free Shipping Cost in US ***************
RUDEDOG USA 3003 - Tie Wire Reel Padded - Black ( Padded Only)
Used under a Tie Wire Reel, for comfort. This leather is from USA bred and raised cattle. Long lasting use.
Made in the USA!!
|
********* Free Shipping Cost in US ********
RUDEDOG USA 3002 - Leather Bull Pin Holder. Made in U.S.A
"We designed this bullpin holder for either a 10" or a 13" bullpin. We have double stitched and riveted the sides of the Bull Pin Holder to keep it together longer. The Tunnel loop will slide onto all belts up to 3" and quick release belts easily. Great for adjustable spud wrenches also! (Bullpin not included)
MADE IN USA!!"
|
*********** Free Shipping Cost in US *************
RUDEDOG USA 3004 - Sleever Bar Holder
This is our Original product. Hand crafted and built to last. Tunnel loop fits up to a 3" wide belt and keeps your bar independent from spuds, allowing choice of weight distribution on belt. Riveted to last. Will accomodate all Connecting Bars, round or hex, with appropriate Lock Collars.
MADE IN USA!!
Weight: .3 lb Width: 1.75" Length: 6" Depth: 2.5"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*********** Free Shipping Cost in US **********
RUDEDOG USA 3005 - Erection Wrench Holder - Spud Wrench Holder
"Used with all Erection Wrenches. Constructed of heavy 12 - 13 oz Harness Leather with a tunnel loop. We make this one with Black Harness Leather, it is more resistant to wear & water and it will take longer for this one to stretch out. This erection wrench scabbard is great for holding the standard 3/4 spud and 7/8 spud. Tunnel loop will slide over quick release belts and any work belt up to 3" wide.
Made in the USA!!"
|
Rudedog
Rudedog 6006T Canvas Bolt Bag w/ Tunnel Loop - Heavy Duty
Made in U.S.A.
|
Occidental Leather 5529 CLIP-ON PRUNERS' HOLSTER. Made in The USANeed to carry garden pruners? Well the solution is here! Occidental Leather's 5529 heavy duty holster. Made in USA of premium leather.
This holster holds all commercial pruners and sports a heavy duty steel clip for easy attachment to belt or pocket. Extra heavy duty steel clip accommodates up to 2” belt Specifications: - Dimensions (w x h): 4" x 7.75"
- Weight: 0.38 lbs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
***** Free Shipping Cost in US ******** PRODUCT DESCRIPTIONRudedog USA - Canvas Bolt Bag w/ Tape Holder - 6006T-TH Constructed of HEAVY #4 canvas, has more rivets in them at the stress points than any other bag the market. Bottom is DOUBLE reinforced and the TUNNEL LOOP is TRIPLE sewn at stress points PLUS riveted! Also has a bull pin loop on each side. We have listened to our customers and we have added a tape holder that is riveted and reinforced with a leather backing. No more digging through your bag looking for your tape measure!! Made in the USA!! |
****** Free Shipping Cost in US ***** Best Seller ******Graber Sleever Bar with Angle Iron holder. Handcrafted from US leather and oil dipped to increase durability. Angle Iron holder with a 1" holde for the sleever bar. Belt loop will take up to a 2 1/2" belt. All Graber Products carry a one year manufacturers warranty against defects. Dimensions: Approx. 2 1/4" wide and 5 1/4" long
|
RUDEDOG USA 3011 - Double Bull Pin Holder With Leather Laced.
Lace Up Double Bullpin Holder. This Double Bullpin Holder accommodates a 10" or 13" bullpin. Constructed of heavy 12 - 13 oz Harness Leather with a tunnel loop. We make this one with Black Harness Leather, it is more resistant to wear & water and it will take longer for this one to stretch out. Fits up to a 2 1/2 inch belt. **Bullpins not Included** Made in U.S.A.Weight: 0.7 lb Width: 3" Length: 12" Depth: 2"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
< />Made in U.S.A. An all leather Beamer holder, constructed with brass rivets and featuring a serpentine border. The holder slips easily onto any belt up to 3 1/2 inches wide. And here, you can see Mr. Graber demonstrating how to properly fit the Beamer:
|
Occidental#5528 - CLIP-ON OFFSET TIN SNIP HOLSTER. Made in The USA This leather holster Holds offset metal snips such as Wiss M6 or M7 and similar models used for steel framing also great for pruning shears. Ideal for use with our 2003 Oxy™ Tool Shield. For straight snips see our 5028 - Single Snip Holder.Extra heavy duty steel clip accommodates up to 2” belt
|
Graber Laced Bull Pin Holder. Constructed from 10/11 oz. leather and riveted for strength and durability. Fully adjustable with lacing to change fit. Belt loop will take up to a 3" belt. Graber Products carry a one year manufacturer's warranty against defects. Dimensions: Approx. 2 1/4" wide and 10" long.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made in U.S.A. Heavy Duty Angle Laced Bullpin Holder from Graber is made from 100% cowhide leather.
|
Made in U.S.A. Heavy Duty The Double Laced Bullpin Holder from Graber is made from 100% cowhide leather. Tunnel loop on back accepts up to 3" work belt.
|
< />
Graber Heavy Leather Spud Wrench Scabbard. Handcrafted From 11/12 oz. US leather and assembled with copper rivets for durability. Rings are 1 1/4" stainless steel and the angle iron has a 1" hole. The belt loop will take a 3" belt. Graber Products carry a one year manufacturer's warranty against defects. Dimensions: Approx. 7 1/2" wide and 10 1/2" long.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
< />Graber Heavy Leather Spud Wrench Scabbard. Handcrafted From 11/12 oz. US leather and assembled with copper rivets for durability. Rings are 1 1/4" stainless steel and the angle iron has a 1" hole. The belt loop will take a 3" belt. Graber Products carry a one year manufacturer's warranty against defects. Dimensions: Approx. 7 1/2" wide and 10 1/2" long.
|
< />Leather Frog | Pig Ear | Spud Wrench Holder | Holster Call it what you will, we call them Bullhide Scabbards. Graber Heavy Duty Leather Spud Wrench Scabbard. Comes with 2 - 1 1/4" rings and a heavy duty snap. Made from 11/12 oz US leather and secured with copper rivets. The belt loop will take up to a 3 1/2" belt. It has been oil-dipped to insure durability. Graber Products carry a one year manufacturers warranty against defects. Dimensions: Approx. 10" long and 6 1/2" wide at its widest point.
|
******** Free Shipping Cost in USA *******
Rudedog USA - 5 Pocket Tool Pouch - #3023 Rudedog USA 5 Pocket Tool Pouch is great for Rodbusters, Lineman, Electricians, Utlities etc. Slots will accommodate up to a 3" belt. Weight: 8 oz
Made in the USA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 ***** Free Shipping Cost in US*****
Cat. No. 87090 Safety Harness for Tower Work, Size - MediumWaist Size: 36''(914 mm) to 44''(1118mm) |
***** Free Shipping Cost in US*****
Cat. No. 87091 Safety Harness for Tower Work, Size - Large Waist Size: 40''(101.6 cm) to 48''(121.9cm) |
***** Free Shipping Cost in US*****
Cat. No. 87092 Safety Harness for Tower Work, Size - XLarge Waist Size: 44''(111.8 cm) to 52''(132.1cm) |
|
|
