You are here: Home > TOOL'S HOLDERS & POUCHES
Choose a sub category:
LEATHER & CANVAS TOOL HOLDERS SLEEVER BAR HOLDERS & BAR HOLDERS BULL PIN HOLDERS
SPUD WRENCH HOLDERS LUMBER CRAYONS, SOAPSTONE & HOLDERS UTILITY TOOL HOLDERS
Sort By:
Page of 2
RUDEDOG USA  5012 - 'Milkers' for Pliers - Rudedog USA ******* Free Shipping Cost in US ********* RUDEDOG USA 5007 - Bolt-On Sleever Bar Holder ******* Free Shipping Cost in US ********* RUDEDOG USA 3006 - The Metal Ring - 1" Erection Wrench Holder - Single Spud Wrench Holder  ********* Best Seller ******** Free Shipping Cost in USA ********
RUDEDOG USA

5012 - 'Milkers' for Pliers - Rudedog USA

****** Free Shipping Cost in US ********

New 'Milker' cushion grips soften the pliers handle that is against the palm of your hand and eases the hand strain of tying rebar.

Two milkers in each package

Made in the USA

RUDEDOG USA 5007 - Bolt-On Sleever Bar Holder
****** Free Shipping Cost in US ********


"New improved! Handmade bolt on sleever bar holder for your erection wrench holder. Redesigned with 3 (instead of 2) bolts. Bolts are 3/4" long to bolt through thicker holders. Locknuts on back. Hole is 1" for up to 7/8 sleever bars, round and hex bars.
Made in the USA!!!"
RUDEDOG USA 3006 Spud Wrench Holder - Metal Ring

"This is our "Ring" made from Black Harness Leather. The Harness Leather is more resistant to the elements. Ideal for 1" spuds
and Adjustable Spuds! Anyone that has had to carry a 1" hard (1 5/8" opening) spud around very long realizes that most erection wrench holders are not made to handle it. Usually the holes stretch to the point that the holder isn't any good for the standard 3/4" & 7/8" spuds anymore, plus it focuses all the weight on one side of your belt. I designed this to handle the problem and allows you to wear it wherever you'd like. Just drop the spud in the ring, and be the envy of every kid on the block! Can be used with any tool that you can slide into the ring (Hammer, Beater, Adjustable Wrench). If you don't have one of these on your belt, you are missing the best tool holder out there.
Made in the USA!"
R J469 Top Grain Closed-End Pliers Holder RUDEDOG USA 3001 - Single Leather Spud Wrench Holder With Tunnel Loop - Leather construction ******* Free Shipping Cost in USA ******* Klein 5460 Erection Wrench Holder. Belt Width Up To 2" ( Spud Wrench Holder) ******* Free Shipping Cost in USA ******
R J469 Top Grain Closed-End Pliers Holder
Our Price: $18.00
Sale Price: $14.90
You save $3.10!

RUDEDOG USA # 3001

Single Leather Spud Wrench Holder With Tunnel Loop - Leather construction


- Tool Holders made from Black Harness Leather. The Harness Leather is more resistant to the elements.
- Tunnel loop on

Made in the USA!"

Erection Wrench Holder # 5460



Product Features
Leather construction.
Has tool-slots for two erection wrenches.
Holds Erection Wrenches and the Adjustable Head Construction Wrench (Cat. No. 3239).
Belt Connection:
Slotted
Belt Width:
Up to 2'' (50.8 mm)
Dimensions:
6'' x 8-1/2'' (152.4 mm x 215.9 mm)
Weight:
0.19 lbs. (0.08 kg)
RUDEDOG USA 3002 - Leather Bull Pin Holder. Made in U.S.A ****** Free Shipping Cost in US ******** KLEIN TOOLS 5459T Erection Wrench Holder (Spud Wrench Holder) Made in U.S.A. ******** Free Shipping Cost in USA ********* RUDEDOG USA 3004 -  "The Original" Sleever Bar Holder TM  ******* Free Shipping Cost In US ***********
********* Free Shipping Cost in US ********
RUDEDOG USA 3002 - Leather Bull Pin Holder. Made in U.S.A

"We designed this bullpin holder for either a 10" or a 13" bullpin. We have double stitched and riveted the sides of the Bull Pin Holder to keep it together longer. The Tunnel loop will slide onto all belts up to 3" and quick release belts easily. Great for adjustable spud wrenches also! (Bullpin not included)
MADE IN USA!!"

KLEIN TOOLS

Erection Wrench Holder

KLEIN TOOLS 5459T

Erection Wrench Holder
  • Leather construction.
  • Has tool-slots for two erection wrenches.
  • Tunnel loop is riveted to assure long life.
  • Holds erection wrenches and adjustable head construction wrench Cat. No. 3239.
Pictured: 5459T
Cat. No. Belt Connection Belt Width Overall Size Weight (lbs.)
5459T tunnel up to 3-1/2" (89 mm) or to slide over D-rings, buckles, and other accessories 6" x 9-1/2"
( 152 x 241)
.32
All dimensions are in inches and (millimeters) except where indicated.

*********** Free Shipping Cost in US *************

RUDEDOG USA 3004 - Sleever Bar Holder
This is our Original product. Hand crafted and built to last. Tunnel loop fits up to a 3" wide belt and keeps your bar independent from spuds, allowing choice of weight distribution on belt. Riveted to last. Will accomodate all Connecting Bars, round or hex, with appropriate Lock Collars.
MADE IN USA!!
Weight: .3 lb Width: 1.75" Length: 6" Depth: 2.5"
RUDEDOG USA 3005 - Erection Wrench Holder - Leather Spud Wrench Holder  ********* Free Shipping Cost in US ********** KLEIN TOOLS 5461T Erection Wrench Holder U.S Made (Spud Wrench Holder) ********* Free Shipping Cost in USA ********* RUDEDOG USA 3005 -3 - Triple Erection Wrench Holder - Leather Spud Wrench Holder For   ********* Free Shipping Cost in US **********
*********** Free Shipping Cost in US **********

RUDEDOG USA 3005 - Erection Wrench Holder - Spud Wrench Holder

"Used with all Erection Wrenches. Constructed of heavy 12 - 13 oz Harness Leather with a tunnel loop. We make this one with Black Harness Leather, it is more resistant to wear & water and it will take longer for this one to stretch out. This erection wrench scabbard is great for holding the standard 3/4 spud and 7/8 spud. Tunnel loop will slide over quick release belts and any work belt up to 3" wide.

Made in the USA!!"

KLEIN TOOLS

Erection Wrench Holder

KLEIN TOOLS 5461T

Erection Wrench Holder
  • Cotton web tunnel loop and leather construction.
  • Holds two erection wrenches.
  • Riveted to assure long life.
  • Holds erection wrenches and adjustable head construction wrench Cat. No. 3239.
Pictured: 5461T
Cat. No. Belt Connection Belt Width Overall Size Weight (lbs.)
5461T cotton web tunnel up to 2"
(51)
6" x 10"
( 152 x 254)
.26
All dimensions are in inches and (millimeters) except where indicated.

*********** Free Shipping Cost in US **********

RUDEDOG USA 3005 -3 Triple Erection Wrench Holder - Spud Wrench Holder. Has tool slots for three spud wrenches

"Used with all Erection Wrenches. Constructed of heavy 13 - 15 oz Harness Leather with a tunnel loop. We make this one with Black Harness Leather, it is more resistant to wear & water and it will take longer for this one to stretch out. This erection wrench scabbard is great for holding the standard 3/4 spud and 7/8 spud. Tunnel loop will slide over quick release belts and any work belt up to 3" wide.

Made in the USA!!" This erection wrench scabbard has 3 holes and is great for holding the standard spuds.

Weight: .4 lb Width: 6" Length: 9.5" Depth: 1"
Occidental 5518 Hammer Holder Klein 5118s Pliers and Screwdriver Holder.Belt Width up to2" ****** Free Shipping Cost in USA  *********** Graber Harness 12- 0019 Sleever Bar Holder W/Angle Iron. Made in USA
Occidental 5518 Hammer Holder
Our Price: $29.99
Sale Price: $24.75
You save $5.24!
Graber Harness 12- 0019 Sleever Bar Holder W/Angle Iron. Made in USA
Our Price: $45.00
Sale Price: $29.99
You save $15.01!

Occidental 5518 - HAMMER HOLDER

5518 - All leather hammer and tool holder with a long sleeve design to prevent tools and handles from swinging and knee-capping. Accommodates 3" wide belt.

Made in the USA



Pockets for 7'', 8'' or 9'' (178 mm, 203 mm or 229 mm) side-cutting pliers and screwdrivers (most sizes).
Slotted to fit belts up to 2'' (51 mm) wide.
Riveted leather construction for long life.
Assembled in USA of U.S. and imported components.
Belt Connection:
Slotted
Belt Width:
Up to 2'' (50.8 mm)
Dimensions:
4-1/4'' x 10-3/4'' (107.95 mm x 273.05 mm)
Pockets:
2
Weight:
0.35 lbs. (0.16 kg)

****** Free Shipping Cost in US ***** Best Seller ******

Graber Sleever Bar with Angle Iron holder. Handcrafted from US leather and oil dipped to increase durability. Angle Iron holder with a 1" holde for the sleever bar. Belt loop will take up to a 2 1/2" belt. All Graber Products carry a one year manufacturers warranty against defects. Dimensions: Approx. 2 1/4" wide and 5 1/4" long

RUDEDOG USA 3011 - DOUBLE BULL PIN HOLDER WITH LEATHER STRINGS KLEIN 5118PRS PLIERS,RULER,SCREWDRIVER HOLDER  BELT WIDTH UP TO 2" ( Color Black) Graber Harness 0080RUS Beamer Holder. Made in U.S.A.
RUDEDOG USA 3011 - DOUBLE BULL PIN HOLDER WITH LEATHER STRINGS
Our Price: $47.00
Sale Price: $31.00
You save $16.00!
Graber Harness 0080RUS Beamer Holder. Made in U.S.A.
Our Price: $47.00
Sale Price: $33.00
You save $14.00!
RUDEDOG USA 3011 - Double Bull Pin Holder With Leather Laced.

Lace Up Double Bullpin Holder. This Double Bullpin Holder accommodates a 10" or 13" bullpin. Constructed of heavy 12 - 13 oz Harness Leather with a tunnel loop. We make this one with Black Harness Leather, it is more resistant to wear & water and it will take longer for this one to stretch out. Fits up to a 2 1/2 inch belt. **Bullpins not Included** Made in U.S.A.

Weight: 0.7 lb Width: 3" Length: 12" Depth: 2"

KLEIN TOOLS

Pliers, Rule

and

Screwdriver Holder

KLEIN TOOLS 5118PRS

Pliers, Rule and Screwdriver Holder
  • Leather construction.
  • 3 pockets for pliers, folding rule and screwdriver.
  • Riveted to assure long life.
  • Pockets for 7", 8", and 9" side-cutting pliers, most screwdrivers, 6' folding rules, and open end wrenches from 9/16" to 13/16".
Pictured: 5118PRS
Cat. No. Belt Connection Belt Width Overall Size Weight (lbs.)
5118PRS slotted up to 2"
(51)
6-3/4" x 10"
( 171 x 254)
.49
All dimensions are in inches and (millimeters) except where indicated.

< />

Made in U.S.A. An all leather Beamer holder, constructed with brass rivets and featuring a serpentine border. The holder slips easily onto any belt up to 3 1/2 inches wide. And here, you can see Mr. Graber demonstrating how to properly fit the Beamer:

Klein 5118RT Pliers and Folding Rule Holder.Belt Width up to3-3/4" Klein 5118R Pliers and Folding Rule Holder.Belt Width up to2" Graber Harness 0027 Heavy Duty Laced Bull Pin Holder. Made in USA
Klein 5118RT Pliers and Folding Rule Holder.Belt Width up to3-3/4"
Our Price: $40.76
Sale Price: $33.34
You save $7.42!
Klein 5118R Pliers and Folding Rule Holder.Belt Width up to2"
Our Price: $39.00
Sale Price: $34.00
You save $5.00!
Graber Harness 0027 Heavy Duty Laced Bull Pin Holder. Made in USA
Our Price: $45.50
Sale Price: $36.00
You save $9.50!
# 5118RT
Product Features
Pockets for 7'', 8'' or 9'' (178 mm, 203 mm or 229 mm) side-cutting pliers and a 6' (1.8 m) folding rule.
Tunnel loop fits belts up to 3-3/4'' (95 mm) wide.
Riveted leather construction for long life.
Assembled in the USA of U.S. and imported components.
Leather construction.
Riveted to assure long life.
Pockets for 7", 8", or 9" side-cutting pliers and 6-ft. folding rule.

Belt Width up to 2"

Graber Laced Bull Pin Holder. Constructed from 10/11 oz. leather and riveted for strength and durability. Fully adjustable with lacing to change fit. Belt loop will take up to a 3" belt. Graber Products carry a one year manufacturer's warranty against defects. Dimensions: Approx. 2 1/4" wide and 10" long.

Graber Harness 0035 Canvas and Leather Bolt Bag. Made in U.S.A. Graber Harness 0075RW   Angle Laced Bull Pin Holder. Made in U.S.A. Tunnel loop on back accepts up to 2" Work Belt. Graber Harness 0075-RW Heavy Duty Laced Bull Pin Holder With Wrench Holder. Made in U.S.A, ****** Best Seller item ***** (tools not included, holder ONLY)
Graber Harness 0035 Canvas and Leather Bolt Bag. Made in U.S.A.
Our Price: $49.00
Sale Price: $41.00
You save $8.00!

******* Free Shipping Cost in US ******
Made in U.S.A. Graber canvas and leather bolt bag is made from no. 4 canvas with a double ply bottom Leather trim around the top gives easy access to the bolts. Cresent wrench holders on the end are made from harness leather for extra strength with leather back panel to prevent wear.

Made in U.S.A. Heavy Duty Angle Laced Bullpin Holder from Graber is made from 100% cowhide leather.

(tools not included, holder ONLY)


Made in U.S.A. Heavy Duty Laced Bull Pin Holder With Wrench Holder from Graber is made from 100% cowhide leather.

Graber Harness 0076RUS  Double / Laced Bull Pin Holder. Made in U.S.A. Graber Harness 0025Blk Leather Sleever Bar Holder with 2 Rings. Black- Leather. Made in U.S.A. ( Leather Spud Scabbard) Graber Harness 0025Rus Heavy Duty Dark Brown Leather Sleever Bar Holder with 2 Rings. Made in U.S.A. ( Leather Spud Scabbard)
Graber Harness 0076RUS Double / Laced Bull Pin Holder. Made in U.S.A.
Our Price: $58.00
Sale Price: $44.95
You save $13.05!

Made in U.S.A. Heavy Duty The Double Laced Bullpin Holder from Graber is made from 100% cowhide leather. Tunnel loop on back accepts up to 3" work belt.

< />


Graber Heavy Leather Spud Wrench Scabbard. Handcrafted From 11/12 oz. US leather and assembled with copper rivets for durability. Rings are 1 1/4" stainless steel and the angle iron has a 1" hole. The belt loop will take a 3" belt. Graber Products carry a one year manufacturer's warranty against defects. Dimensions: Approx. 7 1/2" wide and 10 1/2" long.

< />

Graber Heavy Leather Spud Wrench Scabbard. Handcrafted From 11/12 oz. US leather and assembled with copper rivets for durability. Rings are 1 1/4" stainless steel and the angle iron has a 1" hole. The belt loop will take a 3" belt. Graber Products carry a one year manufacturer's warranty against defects. Dimensions: Approx. 7 1/2" wide and 10 1/2" long.

Graber Harness 12-0021Rus Heavy Duty Leather Spud Wrench Scabbard 2 Rings with Snap Hook. Made in U.S.A. Graber Harness 12-0021BLK Heavy Duty Leather Spud Wrench Scabbard 2 Rings with Snap Hook. Made in U.S.A. Graber Harness - 0022Rus  Leather Spud Wrench Holder with 3 Metal Rings. Made in USA

< />

******** Free Shipping Cost in US ********

Leather Frog | Pig Ear | Spud Wrench Holder | Holster Call it what you will, we call them Bullhide Scabbards. Graber Heavy Duty Leather Spud Wrench Scabbard. Comes with 2 - 1 1/4" rings and a heavy duty snap. Made from 11/12 oz US leather and secured with copper rivets. The belt loop will take up to a 3 1/2" belt. It has been oil-dipped to insure durability. Graber Products carry a one year manufacturers warranty against defects. Dimensions: Approx. 10" long and 6 1/2" wide at its widest point.

< />

Leather Frog | Pig Ear | Spud Wrench Holder | Holster Call it what you will, we call them Bullhide Scabbards. Graber Heavy Duty Leather Spud Wrench Scabbard. Comes with 2 - 1 1/4" rings and a heavy duty snap. Made from 11/12 oz US leather and secured with copper rivets. The belt loop will take up to a 3 1/2" belt. It has been oil-dipped to insure durability. Graber Products carry a one year manufacturers warranty against defects. Dimensions: Approx. 10" long and 6 1/2" wide at its widest point.

< />

Graber Harness # 0022Rus

Handcrafted from US leather and oil dipped to increase durability.