You are here: Home > Featured Brands > MALCO PRODUCTS
Sort By:
Page of 1
MALCO RRW316 Hex Key Wrench Insert. Size 3/16" MALCO RRW516 Hex Key Wrench Insert. Size 5/16" MALCO HHD1T Magnetic Hex Hand Drivers – CONNEXT( Stubby) Size 1/4"
MALCO HHD1T Magnetic Hex Hand Drivers CONNEXT( Stubby) Size 1/4"
Our Price: $18.00
Sale Price: $11.00
You save $7.00!

Made In USA
Malco RRW316 Hex Key Wrench Insert1/4" square drive shanks fit Malco RRW4 and RRW4 Ratchet Wrenches. Facilitates easy ratcheting action for servicing hard to access valves common in air condition and refrigeration condensing units. 1-5/8" long.3/16" hex

Malco RRW516 Hex Key Wrench Insert1/4" square drive shanks fit Malco RRW4 and RRW4 Ratchet Wrenches. Facilitates easy ratcheting action for servicing hard to access valves common in air condition and refrigeration condensing units. 1-5/8" long.5/16" hex
CONNEXT Quick Change handles from Malco, combined with precision-fit and hardened Malco Magnetic Hex Chuck Driver shaft components, offer the ultimate in Hex Hand Driver durability and flexibility. Hex Hand Drivers shown here are sold pre-assembled and packaged as one product, but components are also available separately. Replacing a worn hex hand driver with just a handle or driver shaft at a time is more economical. And changing a hand-held hex driver size can be as easy and thrifty as retrieving a different size chuck driver shaft from your tool bag.
Catalog #DescriptionColor CodeHex Opening in.Insert Dia. in. (mm)Nose Dia. in. (mm)Holder Dia. in. (mm)Shaft Lgth. in. (mm)O/A Length in. (cm)Shaft Repl. #









HHD1TRed1/41/4 (6)7/16 (11)11/16 (18)2-1/4 (57)4-1/8 (10)MSH14
MALCO MSHXL14 Magnetic Hex Chuck Driver. Size 1/4" with 1/4" Hex Shank ***** Best Seller ******* MALCO DS1C Duct Stretcher Replacement Wheel Kit (Wheel Only) ******** Best Seller ******* MALCO HHD1 Magnetic Hex Hand Drivers – CONNEXT( Long) Size 1/4" Length 10-1/2"
MALCO HHD1 Magnetic Hex Hand Drivers CONNEXT( Long) Size 1/4" Length 10-1/2"
Our Price: $19.79
Sale Price: $13.00
You save $6.79!
Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4-inch power insert shanks, meet on-the-job demands for performance and service life whether installed on an electric power drill or used with a CONNEXT Quick Change Handle. Hex Driver sizes are color coded for easy identification and are available in shorts, longs and extra long sizes. DS1C duct stretchers replacement wheels, nuts, screws( 2 Each) For Malco Duct Stretchers Tools.

Made In USA
CONNEXT Quick Change handles from Malco, combined with precision-fit and hardened Malco Magnetic Hex Chuck Driver shaft components, offer the ultimate in Hex Hand Driver durability and flexibility. Hex Hand Drivers shown here are sold pre-assembled and packaged as one product, but components are also available separately. Replacing a worn hex hand driver with just a handle or driver shaft at a time is more economical. And changing a hand-held hex driver size can be as easy and thrifty as retrieving a different size chuck driver shaft from your tool bag.
Catalog #DescriptionColor CodeHex Opening in.Insert Dia. in. (mm)Nose Dia. in. (mm)Holder Dia. in. (mm)Shaft Lgth. in. (mm)O/A Length in. (cm)Shaft Repl. #









HHD1Red1/41/4 (6)7/16 (11)11/16 (18)6-7/8 (175)10-1/2 (27)MSHXL14
MALCO FST Fin Straightening Tools. MALCO FST2 Fin Straightening Tools. ****** Best Seller ******** Free Shipping In US ******** MALCO M2001 Max2000 Aviation Snips - Cuts Left RED/BLACK  Made in U.S.A.
MALCO M2001 Max2000 Aviation Snips - Cuts Left RED/BLACK Made in U.S.A.
Our Price: $29.00
Sale Price: $22.50
You save $6.50!

Fin Straightening Tools# FST

Made In USA

The FST tool straightens commonplace 8, 10, 12, or 14 fins per inch. One-piece adjustable combs. The resilient nylon comb material will not damage the soft aluminum fins of condenser or evaporator units. Malco fin tools function by either pushing or pulling and efficiently straighten fins in tight quarters or where multiple passes over bent fins are required. Comfortable offset handles provide a sure grip and protect knuckles from scraping.

Catalog #Description
FSTFin Straightening tool for 8, 10, 12 , or 14 fins per inch

Fin Straightening Tools# FST2

Made In USA
Use the FST2 tool for straightening closely spaced 16, 18, 20, or 22 fins per inch. Both tools feature one-piece adjustable combs. The resilient nylon comb material will not damage the soft aluminum fins of condenser or evaporator units. Malco fin tools function by either pushing or pulling and efficiently straighten fins in tight quarters or where multiple passes over bent fins are required. Comfortable offset handles provide a sure grip and protect knuckles from scraping.
Catalog #Description


FST2Fin Straightening tool for 16, 18, 20 , or 22 fins per inch
MALCO M2001 Max2000 Aviation Snips - Cuts Left RED/BLACK. Length of Cut in. (mm) 1-3/8" (34.mm )  Tool Length in. (mm) 10" ( 254mm )

Hardened alloy steel blades offer maximum cutting edge life. Superior material flow and lower profile allows maximum maneuverability. Fast adjusting, long life pivot bolt and nylon locking nut with pressure washer holds desired adjustment even for repetitive use in heavy gauge metal. The ergonomic grip maximizes power stroke of hand while the classic grip has the fit and feel of tradition. Tips of jaws ground to point allows access in tight quarters.

-- Features -- • Riveted handles
• Steel Handle Shaft Extends Through Full Length of Grip

Ergonomic Grip Features
• Multi-operational latch is accessible from right, left or top
• Color-coded TPE (thermoplastic elastomer) upper grip
• Nylon lower grip
• Extra long life compression spring
• Riveted handle will not loosen
MALCO M2002 Aviation Snips Ergonomic Grip (Green Handle) -Right Cutting MALCO M2003 Aviation Snips -Ergonomic Grip (Yellow) Straight, Left, Right Cutting MALCO  MAXCG1 Aviation Snips - Max2000 CLASSIC GRIP (RED/BLACK)-LEFT CUTTING
MALCO M2002 Aviation Snips Ergonomic Grip (Green Handle) -Right Cutting
Our Price: $29.00
Sale Price: $22.50
You save $6.50!
MALCO MAXCG1 Aviation Snips - Max2000 CLASSIC GRIP (RED/BLACK)-LEFT CUTTING
Our Price: $29.50
Sale Price: $22.50
You save $7.00!
-- Max2000 Aviation Snips -- Hardened alloy steel blades offer maximum cutting edge life. Superior material flow and lower profile allows maximum maneuverability. Fast adjusting, long life pivot bolt and nylon locking nut with pressure washer holds desired adjustment even for repetitive use in heavy gauge metal. The ergonomic grip maximizes power stroke of hand while the classic grip has the fit and feel of tradition. Tips of jaws ground to point allows access in tight quarters.

Riveted handles
• Steel Handle Shaft Extends Through Full Length of Grip

Ergonomic Grip Features
• Multi-operational latch is accessible from right, left or top
• Color-coded TPE (thermoplastic elastomer) upper grip
• Nylon lower grip
• Extra long life compression spring
• Riveted handle will not loosen
-- Max2000 Aviation Snips -- Hardened alloy steel blades offer maximum cutting edge life. Superior material flow and lower profile allows maximum maneuverability. Fast adjusting, long life pivot bolt and nylon locking nut with pressure washer holds desired adjustment even for repetitive use in heavy gauge metal. The ergonomic grip maximizes power stroke of hand while the classic grip has the fit and feel of tradition. Tips of jaws ground to point allows access in tight quarters.

Riveted handles
• Steel Handle Shaft Extends Through Full Length of Grip

Ergonomic Grip Features
• Multi-operational latch is accessible from right, left or top
• Color-coded TPE (thermoplastic elastomer) upper grip
• Nylon lower grip
• Extra long life compression spring
• Riveted handle will not loosen
-- Max2000 Aviation Snips -- Hardened alloy steel blades offer maximum cutting edge life. Superior material flow and lower profile allows maximum maneuverability. Fast adjusting, long life pivot bolt and nylon locking nut with pressure washer holds desired adjustment even for repetitive use in heavy gauge metal. The ergonomic grip maximizes power stroke of hand while the classic grip has the fit and feel of tradition. Tips of jaws ground to point allows access in tight quarters.

-- Features -- • Riveted handles
• Steel Handle Shaft Extends Through Full Length of Grip  
CLASSIC GRIP- FEATURES  Metal Latch
• Color coded PVC (Polyvinyl chloride) upper grip
• PVC lower grip
• Piano wire torsion handle spring
MALCO MAXCG2 Aviation Snips  Classic Grip (Green Handle) -Right Cutting MALCO MAXCG3 Aviation Snips- Classic Grip (Yellow) Straight, Left, Right Cutting MALCO Max2000 Aviation Snips #M2005 BULL DOG
MALCO MAXCG2 Aviation Snips Classic Grip (Green Handle) -Right Cutting
Our Price: $29.00
Sale Price: $22.50
You save $6.50!
MALCO Max2000 Aviation Snips #M2005 BULL DOG
Our Price: $29.00
Sale Price: $24.75
You save $4.25!
-- Max2000 Aviation Snips -- Hardened alloy steel blades offer maximum cutting edge life. Superior material flow and lower profile allows maximum maneuverability. Fast adjusting, long life pivot bolt and nylon locking nut with pressure washer holds desired adjustment even for repetitive use in heavy gauge metal. The ergonomic grip maximizes power stroke of hand while the classic grip has the fit and feel of tradition. Tips of jaws ground to point allows access in tight quarters.

Riveted handles
• Steel Handle Shaft Extends Through Full Length of Grip

Classic Grip Features
• Metal Latch
• Color coded PVC (Polyvinyl chloride) upper grip
• PVC lower grip
• Piano wire torsion handle spring
-- Max2000 Aviation Snips -- Hardened alloy steel blades offer maximum cutting edge life. Superior material flow and lower profile allows maximum maneuverability. Fast adjusting, long life pivot bolt and nylon locking nut with pressure washer holds desired adjustment even for repetitive use in heavy gauge metal. The ergonomic grip maximizes power stroke of hand while the classic grip has the fit and feel of tradition. Tips of jaws ground to point allows access in tight quarters.

-- Features -- • Riveted handles
• Steel Handle Shaft Extends Through Full Length of Grip
Classic Grip Features
• Metal Latch
• Color coded PVC (Polyvinyl chloride) upper grip
• PVC lower grip
• Piano wire torsion handle spring
-- Max2000 Bulldog Aviation Snips -- Max 2000™ Bulldog Aviation Snip designed for notching and trimming. Ideal for cutting multiple layers or "S" cleats.

-- Features -- • Riveted handles
• Steel Handle Shaft Extends Through Full Length of Grip

Ergonomic Grip Features
• Multi-operational latch is accessible from right, left or top
• Color-coded TPE (thermoplastic elastomer) upper grip
• Nylon lower grip
• Extra long life compression spring
• Riveted handle will not loosen
MALCO M2006 Max2000 Aviation Snips Offset-Ergonomic Grip(Red) Left Angles,Straight Cutting. Made in U.S.A. MALCO M2007  Max2000 Aviation Snips Offset-  Ergonomic Grip  (Green) Left Angles,Straight Cutting. Made in U.S.A. MALCO MAXCG6  Aviation Snips Ofset- Classic Grip (Red) Right  Angles,Straight Cutting
MALCO M2006 Max2000 Aviation Snips Offset-Ergonomic Grip(Red) Left Angles,Straight Cutting. Length of Cut in. (mm) 1-1/4 (31.8) Tool Length in. (mm) 10" (254mm) IMPROVED MAX2000 SNIPS FIT ANY HAND WITHOUT SACRIFICING CUT. Malco Max2000 Aviation Snips now feature all-new, molded thermoplastic grips. These easy-to-spot, solid color coded grips are permanently fitted over full length steel handle shafts and offer strength, comfort and sure handling. A narrower grip opening accommodates large or small hands to maximize the powerful leverage of compound handle-to-head linkage. A new ambidextrous, one-hand-operation latch is another welcome handle change to all Max2000 snips and features an ingenious all-metal design that will not loosen or hang up with repetitive use. Original Max2000 blade designs remain unchanged and retain the same generous cutting lengths. Max2000 hardened alloy steel blades with precision ground cutting edges ensure a minimal force cut and maximum service life. Sleek head and handle styling offer superior material flow and maximum maneuverability. MALCO M2007 Max2000 Aviation Snips Offset-  Ergonomic Grip  (Green) Left Angles,Straight Cutting. Cuts sharp right angles, straight lines and 5” (125 mm) diameter circles. Length of Cut in. (mm)
1-1/4" (31.8mm)   Tool Length in. (mm) 10" (254 mm)

MPROVED MAX2000 SNIPS FIT ANY HAND WITHOUT SACRIFICING CUT. Malco Max2000 Aviation Snips now feature all-new, molded thermoplastic grips. These easy-to-spot, solid color coded grips are permanently fitted over full length steel handle shafts and offer strength, comfort and sure handling. A narrower grip opening accommodates large or small hands to maximize the powerful leverage of compound handle-to-head linkage. A new ambidextrous, one-hand-operation latch is another welcome handle change to all Max2000 snips and features an ingenious all-metal design that will not loosen or hang up with repetitive use. Original Max2000 blade designs remain unchanged and retain the same generous cutting lengths. Max2000 hardened alloy steel blades with precision ground cutting edges ensure a minimal force cut and maximum service life. Sleek head and handle styling offer superior material flow and maximum maneuverability.
-- Max2000 Offset Aviation Snips -- The serrated upper jaw of the Max2000 Offset Snip offers solid gripping power with less burr. Ground tips on jaws allow access in tight areas, so that Max Offsets can easily make nickel size blind hole cuts. A full 1-1/4" cutting length and a cutting plane offset from handles makes trim cuts with the Max2000 Offset both accessible and efficient. Available with either a left (shown left) cutting or right cutting application.

-- Features -- • Riveted handles
• Steel Handle Shaft Extends Through Full Length of Grip

Classic Grip Features
• Metal Latch
• Color coded PVC (Polyvinyl chloride) upper grip
• PVC lower grip
• Piano wire torsion handle spring
MALCO  MAXCG7  Aviation Snips Ofset-   Classic Grip  (Green) Left Angles,Straight Cutting Malco MC12NG Andy Aluminum Handled Snips 12" MALCO M2004 Aviation Snips: Double Cut - Max2000
Malco MC12NG Andy Aluminum Handled Snips 12"
Our Price: $39.00
Sale Price: $31.00
You save $8.00!
MALCO M2004 Aviation Snips: Double Cut - Max2000
Our Price: $54.23
Sale Price: $45.00
You save $9.23!
-- Max2000 Offset Aviation Snips -- The serrated upper jaw of the Max2000 Offset Snip offers solid gripping power with less burr. Ground tips on jaws allow access in tight areas, so that Max Offsets can easily make nickel size blind hole cuts. A full 1-1/4" cutting length and a cutting plane offset from handles makes trim cuts with the Max2000 Offset both accessible and efficient. Available with either a left (shown left) cutting or right cutting application.

-- Features -- • Riveted handles
• Steel Handle Shaft Extends Through Full Length of Grip
Classic Grip Features
• Metal Latch
• Color coded PVC (Polyvinyl chloride) upper grip
• PVC lower grip
• Piano wire torsion handle spring

Andy Aluminum Handled Snips 12" # MC12NG

Sleek styling, easy blade replacement and larger handles make the Andy™ Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in tight material, shapes such as J-Channel. A full 3" (76.2 mm) cutting length makes straight shearing with the Malco Andy™ Snip fast and easy. Blade replacement is easily accomplished in the field.

Catalog #DescriptionLength of Cut in. (mm)Length in. (cm)Net Weight oz. (g)Repl. Blade





MC12NGAndy 123 (76.2)12 (31)20 (567)MC12NRB





andys

Made In USA
Description   Grip Color Yellow   Cutting Application - Straight/Double Cut     Length of Cut in. (mm) 1-3/8"(34.9)  Tool Length in. (mm) 10"(254)
Net Weight 16oz          Capacities      Aluminum .040(1.02mm)             Copper .034(0.86mm)                 Galvanized Steel (22 Gauge) .034(0.86mm)                 Mild Steel (22 Gauge) 0.030(0.76mm)                         Stainless Steel n/a
                                                       
IMPROVED MAX2000 SNIPS FIT ANY HAND WITHOUT SACRIFICING CUT. Malco Max2000 Aviation Snips now feature all-new, molded thermoplastic grips. These easy-to-spot, solid color coded grips are permanently fitted over full length steel handle shafts and offer strength, comfort and sure handling. A narrower grip opening accommodates large or small hands to maximize the powerful leverage of compound handle-to-head linkage. A new ambidextrous, one-hand-operation latch is another welcome handle change to all Max2000 snips and features an ingenious all-metal design that will not loosen or hang up with repetitive use. Original Max2000 blade designs remain unchanged and retain the same generous cutting lengths. Max2000 hardened alloy steel blades with precision ground cutting edges ensure a minimal force cut and maximum service life. Sleek head and handle styling offer superior material flow and maximum maneuverability.
MALCO M15 Forged Steel Snips: Bulldog Pattern Malco PL1R Metal Stud Punch Crimper. Made in U.S.A.
MALCO M15 Forged Steel Snips: Bulldog Pattern
Our Price: $79.00
Sale Price: $65.00
You save $14.00!
Malco PL1R Metal Stud Punch Crimper. Made in U.S.A.
Our Price: $79.70
Sale Price: $70.50
You save $9.20!
Made in U.S.A. Big, powerful snip for straight cuts and notches.
Catalog #DescriptionLength of Cut in. (mm)Length in. (cm)Net Weight lbs. (kg)
M15Bulldog Pattern Snip2-1/2 (63.5)16-1/2 (42)3.89 (1.77)
Ergonomic handle contours with an over-molded, non-slip handle insert assures a natural fit and feel for the way you work. Punch lock stud crimper that uses compound leverage to increase your mechanical advantage nearly 7 to 1 Unique punch and die shape creates a rectangular crimp to form a sturdy bond Aluminum/zinc die-cast 'C' frame and rust-resistant, nickel-plated steel handles and parts; non-slip vinyl grips with hand stops Replaceable punch and die; maximum capacity 22-gauge stud and runner
Catalog #DescriptionThroat Depth in. (mm)Capacity: Galvanized Steel Gauge (mm)Nominal Length in. (mm)Net Weight oz. (g)
PL1RPunch Lock Stud Crimper1-1/2 (38.1)22 (0.86)9-1/2 (241)16 (454)