You are here: Home > Ironworker Tools > CLAMPS
Sort By:
Page of 2
VISE GRIP #6SP Locking C-Clamps with Swivel Pads: Size 6"
Our Price: $16.00
Sale Price: $12.00
You save $4.00!
Vise Grip 6R Locking C-Clamps with Regular Tips: Size 6"
Our Price: $15.00
Sale Price: $12.99
You save $2.01!
STRONG HAND UD45-C3 4-IN-1 UTILITY CLAMPS. CAPACITY 4-1/2 INCHES
Our Price: $22.00
Sale Price: $17.50
You save $4.50!
Wide-opening jaws provide greater versatility in clamping a variety of shapes
Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Packing Type Carded  
Overall Length 6 in  
Jaw Opening 0 in [Min], 2 1/8 in [Max]  
Throat Depth 1 1/2 in  
Mechanism Adjustable Mechanical Locking  
Material Alloy Steel  
Type Locking Plier Clamp
Wide-opening jaws provide greater versatility in clamping a variety of shapes
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Packing Type Carded  
Overall Length 6 in  
Jaw Opening 0 in [Min], 2 in [Max]  
Throat Depth 1 1/2 in  
Mechanism Adjustable Mechanical Locking  
Material Alloy Steel  
Type Locking Plier Clamp
The most Versatile Sliding Arm Clamp on the market.
- Strong Hand© 4-IN-1 Utility Clamps C3 PackageThe C3 Package comes with a Utility Clamp, V-Pad Accessories, and Extender Block.

Capacity           Throat Depth             Rail Size                     Threaded Hole                        Clamping Pressure  
4-1/2 Inch           3-1/4 Inch                5/8 x 5/16 Inch             5/16-18                                    500 Lbs
C.H. Hanson 7" C Clamp Self-Adjusting Locking Pliers
List Price: $22.00
Our Price: $17.50
You save $4.50!
Vise Grip 11R Locking C-Clamps W/Regular Tips. SIZE 11"
Our Price: $26.50
Sale Price: $18.99
You save $7.51!
VISE-GRIP Locking C-Clamps with Regular Tips: 11R
List Price: $25.00
Our Price: $19.00
You save $6.00!
C.H. Hanson Self-Adjusting Pliers provide the versatility of standard locking pliers. However that's where the comparison ends. Traditional locking pliers require two hands to adjust the jaw opening for each task. C.H. Hanson has engineered out the knob and replaced it with our patented locking mechanism. This revolutionary self-adjusting capability makes jobs faster and easier.

Using the C.H. Hanson Self-Adjusting Locking C-Clamp Pliers you can spend less time playing around with your tools and more time getting the job done. Wide-opening jaws provide greater versatility in clamping a variety of shapes.
The Original™ Locking C-Clamps with Regular Tips


Wide-opening jaws provide greater versatility in clamping a variety of shapes

Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use

Constructed of high-grade heat-treated alloy steel for maximum toughness and durability

Guarded release trigger quickly unlocks and protects from accidental release

Size 11-INCH (275MM)    Jaw Capacity 3-3/8 INCH (85MM)
Wide-opening jaws provide greater versatility in clamping a variety of shapes
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Packing Type Carded  
Overall Length 11 in  
Jaw Opening 0 in [Min], 4 in [Max]  
Throat Depth 2 5/8 in  
Mechanism Adjustable Mechanical Locking  
Material Alloy Steel  
Type Locking Plier Clamp
C.H. Hanson 7" C Clamp Self-Adjusting Locking Pliers With Swivel Pad
List Price: $25.00
Our Price: $19.99
You save $5.01!
C.H. Hanson 06206 - 10" Long Reach C-Clamp
List Price: $25.00
Our Price: $19.99
You save $5.01!
VISE-GRIP Curved Jaw Locking Pliers: 10SP
List Price: $26.00
Our Price: $21.95
You save $4.05!
C.H. Hanson Self-Adjusting Pliers provide the versatility of standard locking pliers. However that's where the comparison ends. Traditional locking pliers require two hands to adjust the jaw opening for each task. C.H. Hanson has engineered out the knob and replaced it with our patented locking mechanism. This revolutionary self-adjusting capability makes jobs faster and easier.

C.H. Hanson C-Clamp with Swivel Pads offer the same great advantages as C.H. Hanson C-Clamps, plus have the Swivel Pad. Swivel Pads allow parallel clamping while preventing denting or gouging on delicate surfaces
C.H. Hanson Self-Adjusting Pliers provide the versatility of standard locking pliers. However that's where the comparison ends. Traditional locking pliers require two hands to adjust the jaw opening for each task. C.H. Hanson has engineered out the knob and replaced it with our patented locking mechanism. This revolutionary self-adjusting capability makes jobs faster and easier.

Using the C.H. Hanson Self-Adjusting Locking C-Clamp Pliers you can spend less time playing around with your tools and more time getting the job done. Wide-opening jaws provide greater versatility in clamping a variety of shapes
Wide-opening jaws provide greater versatility in clamping a variety of shapes
Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Packing Type Carded  
Overall Length 11 in  
Jaw Opening 0 in [Min], 3 7/8 in [Max]  
Throat Depth 2 5/8 in  
Mechanism Adjustable Mechanical Locking  
Material Alloy Steel  
Type Locking Plier Clamp
C.H. Hanson 11" C Clamp Self-Adjusting Locking Pliers
List Price: $28.00
Our Price: $23.99
You save $4.01!
C.H. Hanson 11" C Clamp Self-Adjusting Locking Pliers With Swivel Pad
Our Price: $32.00
Sale Price: $25.90
You save $6.10!
C.H. Hanson Self-Adjusting Pliers provide the versatility of standard locking pliers. However that's where the comparison ends. Traditional locking pliers require two hands to adjust the jaw opening for each task. C.H. Hanson has engineered out the knob and replaced it with our patented locking mechanism. This revolutionary self-adjusting capability makes jobs faster and easier.

Using the C.H. Hanson Self-Adjusting Locking C-Clamp Pliers you can spend less time playing around with your tools and more time getting the job done. Wide-opening jaws provide greater versatility in clamping a variety of shapes
C.H. Hanson Self-Adjusting Pliers provide the versatility of standard locking pliers. However that's where the comparison ends. Traditional locking pliers require two hands to adjust the jaw opening for each task. C.H. Hanson has engineered out the knob and replaced it with our patented locking mechanism. This revolutionary self-adjusting capability makes jobs faster and easier.

C.H. Hanson C-Clamp with Swivel Pads offer the same great advantages as C.H. Hanson C-Clamps, plus have the Swivel Pad. Swivel Pads allow parallel clamping while preventing denting or gouging on delicate surfaces.
Adjust -O- Magnetic Square.
Strong Hand© Magnet Square The patented ON/OFF switch on each of our Adjust-O magnets will make positioning easier, and safer to use.
              Angle                                       Demension                                           Pull
   45 Degree , 90 Degree                    4-3/8 x 3-3/4 x 1"                                     50 Lbs
                                                       (110 x 95 x 25 mm)                                   ( 23 Kg  )
STRONG HAND PE6 EXPANDING/SPREADING PLIERS. HEAVY DUTY
Our Price: $35.98
Sale Price: $29.00
You save $6.98!
STRONG HAND PG634V Adjustable Pipe Pliers.Opening 2" to 3"
Our Price: $42.00
Sale Price: $31.00
You save $11.00!
VISE-GRIP Vise-Grip® 18R Locking Clamp With Regular Tips. Size 18"
List Price: $39.00
Our Price: $32.00
You save $7.00!

Expand-O Pliers

Unique, Reverse-Action Clamping Pliers!

Jaws move in opposite directions to push against two surfaces.

  • Clamp around odd or awkwardly shaped items.
  • Hold two workpieces, or a group of materials securely in place while you weld.
  • The ONLY Expand-O Pliers with replaceable expandos of various lengths! Chain lengths from 16" (400 mm) to 48"(1,220 mm). Custom length expandos available.
  • Made of heat treated alloy steel for strength and durability.
Part No.OALClamping PressureThreadMin.StrokeWeight
PE6

6 1/2"

500 LBS

5/16-18

1"

3/4"

.5 LBS

Expand-O Pliers

The convenient way to hold round or square tubes for butt-welding.

  • Wide opening allows the Pipe Pliers to hold up to 3"(64 mm) diameter pipes.
  • 2 large V-Pads provide a better clamping surface.
  • 0° & 45° angle clip allows angled clamping.
  • Part No.OALTop V-PadBottom V-PadThroat DepthOpeningThreadWeight







    PG634V8-1/2"
    (216 mm)
    Fixed Fixed
    3"
    (76 mm)
    2" - 3"
    (38 - 64 mm)
    M81.2 LBS
    (0.5 kg)
Wide-opening jaws provide greater versatility in clamping a variety of shapes
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Packing Type Carded  
Overall Length 18 in  
Jaw Opening 0 in [Min], 8 in [Max]  
Throat Depth 9 1/2 in  
Mechanism Adjustable Mechanical Locking  
Material Alloy Steel  
Type Locking Plier Clamp
VISE GRIP 12LC Large Jaw Locking Pliers. Length 12" Made in U.S.A.
Our Price: $39.00
Sale Price: $32.00
You save $7.00!
Made in U.S.A. Large Jaw Locking Pliers. 3-1/8"" Clamping Capacity. Lock on tight! Adjustable pressure and jaw size. Use for twisting, deep reach, clamping, bending and turning.

The convenient way to hold round or square tubes for butt-welding.

  • Wide opening allows the Pipe Pliers to hold up to 2-1/2"(64 mm) diameter pipes.
  • Adjustable top spindle for holding pipes of varying sizes.
  • 2 large V-Pads provide a better clamping surface.
  • 0° & 45° angle clip allows angled clamping.
  • Part No.OALTop V-PadBottom V-PadThroat DepthOpeningThreadWeight







    PG635V8-1/2"
    (216 mm)
    AdjustableMagnetic
    0° & 45° rotatable
    3"
    (76 mm)
    1-1/2" - 2-1/2"
    (38 - 64 mm)
    M81.2 LBS
    (0.5 kg)
Hardened tip on forcing screw
Square head forcing screw for use with wrench
Heavy-duty threaded hub design
Opening Size 0 in [Min], 1 5/16 in [Max]  
Throat Depth 15/16 in  
Spindle Diam 7/16 in  
Body Material Forged Alloy Steel  
Finish Black  
Locking Type Thread Locking  
Handle Type Square Head  
Type C-Clamp  
Wt. 0.70 lb  
UPC 662679480011
UNSPSC 27112120
Heavy Duty Service C-Clamps.
  Maxinum        Minimum           Throat Depth          Exterior                   Screw                 Screw Length
  Capacity        Capacity            From Center           Body Width              Diameter            Under Head
   (Inches )          (Inches)        (Inches)                 (Inches)                   (Inches)             (Inches)
    1-3/8"             0"                   1-1/8"                   2-23/32"                   13/32"                2-7/16"

Adjust-O™ Magnet Squares


The original magnet squares featuring On/Off switches.

The fast & easy way to hold metal workpieces at 45° & 90°.

  • Turn the magnet Off when setting up, turn On when you're ready to work. Fast and safe set-up!
  • Ideal for round and square tubing, angle, and flat stock.
  • Easy to clean. Simply turn Off and wipe.
Max. Pull Force Dimension Weight

MSA48-HD160 LBS
(75 kg)
6 x 5-1/8 x 1-3/8"
(152 x 130 x 35 mm)
3.0 LBS
(1.4 kg)

Adjust-O™ Magnet Squares


The original magnet squares featuring On/Off switches.

The fast & easy way to hold metal workpieces at Multi-Angles: 30° 45°, 60° 90°

  • Turn the magnet Off when setting up, turn On when you're ready to work. Fast and safe set-up!
  • Ideal for round and square tubing, angle, and flat stock.
  • Easy to clean. Simply turn Off and wipe.
Max. Pull Force Dimension Weight

MSA53-HD140 LBS
(65 kg)
6 x 5-1/8 x 1-3/8"
(152 x 130 x 35 mm)
3.0 LBS
(1.4 kg)
STRONG HAND MS2- 80 Adjust-O™ 90° Dual Switch Magnet Squares
Our Price: $150.00
Sale Price: $109.00
You save $41.00!
Armstrong 78-030 Heavy Duty Pattern C- Clamps.Made in U.S.A.
Our Price: $176.00
Sale Price: $125.00
You save $51.00!
The strongest C-Clamp made Square-head screw has hardened point Screw does not include handle--it must be tightened with a wrench Extra long hub helps prevent springing even under great stress
Item No Maximum Capacity(Inch) Throat Depth Thread Size
Armstrong 78-021 0 Inch( Min ) To 2-3/8"(Max) 1-9/16"

3/4"-10

Body Material Forged Steel Locking Type Thread Locking Handle Type Square Head. Wt. 3.28 lb

Adjust-O™ 90° Dual Switch Magnet Squares

Angle magnet squares with the convenience of On/Off switches.

For professional jobs that demand strong hold down forces. Hold flat and round metal work pieces.

  • Two On/Off switches for independent operation.
  • Turn the magnets Off when setting up, turn On when you're ready to work. Easy and safe set-up!
  • Precision machined flat and V-surfaces are ideal for round and square tubing, angle, and flat stock.
  • 120 LBS (55 kg) pull force.
  • * Magnetic force is based on the longest side of Magnet with 3/8" thick steel.

Adjust-O Angle Magnet
Part No.Max. Pull ForceDimensionWeight
MS2-80120 LBS
(55 kg)
6 x 6 x 1-1/2"
(152 x 152 x 38 mm)
2.7 LBS
(1.2 kg)
-The strongest C-Clamp made
- Square- head screw has hardened point
- Screw does not include handle it must be tightened with a wrench
- Extra long hub helps prevent springing even under great stress Test & Approvals : FED SPEC. GGG-C-406d
Body Material : Forged Steel
- Locking Type : Thread Locking
- Handle Type: Square Head
Opening Size 5/8" to 3-5/16"
Throat Depth 2 inch
Spindle Diam 7/8"
Thread Per Inch 9   Wt 5.83 lb
Made in U.S.A
The strongest C-Clamp made Square-head screw has hardened point Screw does not include handle--it must be tightened with a wrench Extra long hub helps prevent springing even under great stress .
Item No Opening Size (Inch ) Throat Depth Thread Size
Armstrong 78 -031 0 Inch (Minimum) To 3-5/16" (Max) 2 Inch 7/8" -9
Body Material Forged Steel Locking Type Thread Locking Handle Type Square Head Wt. 5.83 lb Testing and Approvals: FED SPEC. GGG-C-406d
Models with Copper plated screws resist adherence of welding splatter. Heavy service C-Clamps are available for the most demanding applications such as construction and heavy industry. I-beam designe for greater strength and lighter weight. Drop-forged and heat treated frames for greater safety and strength.
Heavy Duty Service C-Clamps.
Features;
- Especially designed for heavy duty service frames are drop-forged and heat-treated for maximum strength and reduced springing.
- Screws are made of special grade steel and are heat-treated for added strength not found in typical case-hardened screws.
- Ideal for the most demanding applications such as construction and heavy industry.
- Square head screw allows tightening with wrench for extra heavy duty clamping requirements.
- Greater anvil surface for gripping larger work pieces and for greater stability.
  Maxinum        Minimum           Throat Depth          Exterior                   Screw                 Screw Length
  Capacity        Capacity            From Center           Body Width              Diameter            Under Head
   (Inches )          (Inches)        (Inches)                 (Inches)                   (Inches)             (Inches)
    4-21/32"             0"                   2-7/8"                   6-1/4"                   27/32"                    7-1/4"
The strongest C-Clamp made Square-head screw has hardened point Screw does not include handle--it must be tightened with a wrench Extra long hub helps prevent springing even under great stress
Item No Opening Size Throat Depth Thread Size ( Spindle Dia )
Armstrong 78-041

0 Inch (Minimum) To 4-5/8" (Max )

2 -7/16 Inch

1" - 8

Body Material Forged Steel Locking Type Thread Locking Handle Type Square Head Wt. 10.10 lb Testing and Approvals: FED SPEC. GGG-C-406d
STRONG HAND MS2- 90 Adjust-O™ 90° Dual Switch Magnet Squares
Our Price: $220.00
Sale Price: $189.00
You save $31.00!
Models with Copper plated screws resist adherence of welding splatter. Heavy service C-Clamps are available for the most demanding applications such as construction and heavy industry. I-beam designe for greater strength and lighter weight. Drop-forged and heat treated frames for greater safety and strength.
Heavy Duty Service C-Clamps.
Features;
- Especially designed for heavy duty service frames are drop-forged and heat-treated for maximum strength and reduced springing.
- Screws are made of special grade steel and are heat-treated for added strength not found in typical case-hardened screws.
- Ideal for the most demanding applications such as construction and heavy industry.
- Square head screw allows tightening with wrench for extra heavy duty clamping requirements.
- Greater anvil surface for gripping larger work pieces and for greater stability.
  Maxinum        Minimum           Throat Depth          Exterior                   Screw                 Screw Length
  Capacity        Capacity            From Center           Body Width              Diameter            Under Head
   (Inches )          (Inches)        (Inches)                 (Inches)                   (Inches)             (Inches)
    6-1/2"             1-5/32"                   3-1/2"                   7-1/2"                   1-3/32"                    8"

Adjust-O™ 90° Dual Switch Magnet Squares

Angle magnet squares with the convenience of On/Off switches.

For professional jobs that demand strong hold down forces. Hold flat and round metal work pieces.

  • Two On/Off switches for independent operation.
  • Turn the magnets Off when setting up, turn On when you're ready to work. Easy and safe set-up!
  • Precision machined flat and V-surfaces are ideal for round and square tubing, angle, and flat stock.
  • 265 LBS ( 120 kg) pull force.
  • * Magnetic force is based on the longest side of Magnet with 3/8" thick steel.

Adjust-O Angle Magnet
Part No.Max. Pull ForceDimensionWeight
MS2-90265 LBS
(120 kg)
7-3/4 x 7-3/4 x 1-7/8"
(197 x 197 x 48 mm)
6.0 LBS
(2.7 kg)
Models with Copper plated screws resist adherence of welding splatter. Heavy service C-Clamps are available for the most demanding applications such as construction and heavy industry. I-beam designe for greater strength and lighter weight. Drop-forged and heat treated frames for greater safety and strength.
Heavy Duty Service C-Clamps.
Features;
- Especially designed for heavy duty service frames are drop-forged and heat-treated for maximum strength and reduced springing.
- Screws are made of special grade steel and are heat-treated for added strength not found in typical case-hardened screws.
- Ideal for the most demanding applications such as construction and heavy industry.
- Square head screw allows tightening with wrench for extra heavy duty clamping requirements.
- Greater anvil surface for gripping larger work pieces and for greater stability.
  Maxinum        Minimum           Throat Depth          Exterior                   Screw                 Screw Length
  Capacity        Capacity            From Center           Body Width              Diameter            Under Head
   (Inches )          (Inches)        (Inches)                 (Inches)                   (Inches)             (Inches)
    6-1/2"             0"                   3-1/2"                   7-1/2"                   1-3/32"                    10"