You are here: Home > Featured Brands > RUDEDOG
Find by Brand
Sort By:
Page of 1
RUDEDOG USA 5006 - Lock Collar & Grommett 7/8 round bar only
Our Price: $9.90
Sale Price: $8.50
You save $1.40!
RUDEDOG USA 5006 - Lock Collar & Grommett 7/8" Round Bar

"If you have a 7/8" Round Sleever Bar, this should be the last stopper you need to hold your bar in your holder. Fits most 7/8" dia. round sleever bar. Tighten down with a 5/32" hex wrench. Wet the inside of grommet for easy positioning up the bar. These do come standard on our Sleever Bar #7878Z
Made in the USA."
RUDEDOG USA 5004 - Lock Collar & Grommett 7/8" Hex Bar

"If you have a 7/8" Hex Sleever Bar, this should be the last stopper you need to hold your bar in your holder. Fits most 7/8" dia. Hex sleever bar. Tighten down with a 5/32" hex wrench. Wet the inside of grommet for easy positioning up the bar. These do come standard on our Sleever Bar #7730Z
Made in the USA."
RUDEDOG USA 5003 - Lock Collar & Grommett 3/4" Hex Bar

"If you have a 3/4" Hex Sleever Bar, this should be the last stopper you need to hold your bar in your holder. Fits most 3/4" dia. Hex sleever bar. Tighten down with a 5/32" hex wrench. Wet the inside of grommet for easy positioning up the bar.
Made in the USA."
RUDEDOG USA 5005 - Lock Collar & Grommett 3/4" round bar only
Our Price: $10.90
Sale Price: $8.99
You save $1.91!
RUDEDOG USA 5005 - Lock Collar & Grommett 3/4" Round Bar

"If you have a 3/4" Round Sleever Bar, this should be the last stopper you need to hold your bar in your holder. Fits most 3/4" dia. round sleever bar. Tighten down with a 5/32" hex wrench. Wet the inside of grommet for easy positioning up the bar.
Made in the USA."
Part #5005 UPC #
Weight: .25 lb Width: 1.25" Length: 1.25" Depth: 1.5"
RUDEDOG USA

5012 - 'Milkers' for Pliers - Rudedog USA

****** Free Shipping Cost in US ********

New 'Milker' cushion grips soften the pliers handle that is against the palm of your hand and eases the hand strain of tying rebar.

Two milkers in each package

Made in the USA

RUDEDOG USA # 3012

Rudedog USA Tape Measure Holder. Made in the USA!!

Weight: .19lb Width: 2" Length: 4" Depth: 1.5"

Fits most major tape sizes. Constructed of heavy 13 - 15 oz Harness Leather with a tunnel loop. We make this one with Black Harness Leather, it is more resistant to wear & water and it will take longer for this one to stretch out. Conveniently fits up to a 2 1/2 inch belt.

RUDEDOG USA 3013 Rudedog USA Hammer Holder
Our Price: $22.00
Sale Price: $15.00
You save $7.00!
*********** Free Shipping Cost in US ***************

RUDEDOG USA 3007 - The Clip - Snap Loop

"
This a great snap loop made from Black Harness Leather. The Harness Leather is more resistant to the elements and will not stretch out as quickly. Handmade leather loop with a large clip-hook at the bottom. Rudedog's large leather snap loop is awesome for any tool that you can hang. Guys on the job use'em for adjustable wrenches, flint strikers, keys, even something like safety glasses when not in use.
Made in the USA!!!
"

Weight: .2 lb Width: 1.5" Length: 8" Depth: 1.5"
RUDEDOG USA # 3013

Rudedog USA Hammer Holder. Made in the USA!!

Weight: 0.19lb Width: 2" Length: 4" Depth: 2.5"

Our universal hammer holder fits all size hammers. Constructed of heavy 12-13 oz Harness Leather with a tunnel loop. We make this one with Black Harness Leather, it is more resistant to wear & water and it will take longer for this one to stretch out. Conveniently fits up to a 2 1/2 inch belt.

RUDEDOG USA 5007 - Bolt-On Sleever Bar Holder
****** Free Shipping Cost in US ********


"New improved! Handmade bolt on sleever bar holder for your erection wrench holder. Redesigned with 3 (instead of 2) bolts. Bolts are 3/4" long to bolt through thicker holders. Locknuts on back. Hole is 1" for up to 7/8 sleever bars, round and hex bars.
Made in the USA!!!"
RUDEDOG USA 3014 - Rudedog USA Tool Lanyard Tether Holder
Our Price: $22.00
Sale Price: $17.00
You save $5.00!
RUDEDOG USA 3006 Spud Wrench Holder - Metal Ring

"This is our "Ring" made from Black Harness Leather. The Harness Leather is more resistant to the elements. Ideal for 1" spuds
and Adjustable Spuds! Anyone that has had to carry a 1" hard (1 5/8" opening) spud around very long realizes that most erection wrench holders are not made to handle it. Usually the holes stretch to the point that the holder isn't any good for the standard 3/4" & 7/8" spuds anymore, plus it focuses all the weight on one side of your belt. I designed this to handle the problem and allows you to wear it wherever you'd like. Just drop the spud in the ring, and be the envy of every kid on the block! Can be used with any tool that you can slide into the ring (Hammer, Beater, Adjustable Wrench). If you don't have one of these on your belt, you are missing the best tool holder out there.
Made in the USA!"
RUDEDOG USA # 3014

Rudedog USA Tool Lanyard Tether Holder. Made in the USA!!

Weight: 0.24lb Width: 1.5" Length: 6" Depth: 1"

Our tool lanyard holder holds up to six tool lanyards. Also ideal for holding a spud ratchet. Constructed of heavy 13 - 15 oz Harness Leather with a tunnel loop. We make this one with Black Harness Leather, it is more resistant to wear & water and it will take longer for this one to stretch out. Conveniently fits up to a 2 1/2 inch belt. **Lanyard not included.**

*********** Free Shipping Cost in US ***************

RUDEDOG USA 3003 - Tie Wire Reel Padded - Black ( Padded Only)
Used under a Tie Wire Reel, for comfort. This leather is from USA bred and raised cattle. Long lasting use.
Made in the USA!!

********* Free Shipping Cost in US ********
RUDEDOG USA 3002 - Leather Bull Pin Holder. Made in U.S.A

"We designed this bullpin holder for either a 10" or a 13" bullpin. We have double stitched and riveted the sides of the Bull Pin Holder to keep it together longer. The Tunnel loop will slide onto all belts up to 3" and quick release belts easily. Great for adjustable spud wrenches also! (Bullpin not included)
MADE IN USA!!"
RUDEDOG USA # 3001

Single Leather Spud Wrench Holder With Tunnel Loop - Leather construction


- Tool Holders made from Black Harness Leather. The Harness Leather is more resistant to the elements.
- Tunnel loop on

Made in the USA!"
*********** Free Shipping Cost in US *************

RUDEDOG USA 3004 - Sleever Bar Holder
This is our Original product. Hand crafted and built to last. Tunnel loop fits up to a 3" wide belt and keeps your bar independent from spuds, allowing choice of weight distribution on belt. Riveted to last. Will accomodate all Connecting Bars, round or hex, with appropriate Lock Collars.
MADE IN USA!!
Weight: .3 lb Width: 1.75" Length: 6" Depth: 2.5"
*********** Free Shipping Cost in US **********

RUDEDOG USA 3005 - Erection Wrench Holder - Spud Wrench Holder

"Used with all Erection Wrenches. Constructed of heavy 12 - 13 oz Harness Leather with a tunnel loop. We make this one with Black Harness Leather, it is more resistant to wear & water and it will take longer for this one to stretch out. This erection wrench scabbard is great for holding the standard 3/4 spud and 7/8 spud. Tunnel loop will slide over quick release belts and any work belt up to 3" wide.

Made in the USA!!"
*********** Free Shipping Cost in US **********

RUDEDOG USA 3005 -3 Triple Erection Wrench Holder - Spud Wrench Holder. Has tool slots for three spud wrenches

"Used with all Erection Wrenches. Constructed of heavy 13 - 15 oz Harness Leather with a tunnel loop. We make this one with Black Harness Leather, it is more resistant to wear & water and it will take longer for this one to stretch out. This erection wrench scabbard is great for holding the standard 3/4 spud and 7/8 spud. Tunnel loop will slide over quick release belts and any work belt up to 3" wide.

Made in the USA!!" This erection wrench scabbard has 3 holes and is great for holding the standard spuds.

Weight: .4 lb Width: 6" Length: 9.5" Depth: 1"
RUDEDOG USA 3008 - Swival Metal Pig Tail Sleever Bar Holder ****** Best Selling *******

"We call this the 'pigtail' cuz they're built tuff. Hand crafted by Rudedog USA. This holder swivels, yet is low enough in gravity to not allow sleever to 'spin out' while climbing around. Tunnel loop keeps it independent from spuds allowing choice of weight distribution on belt. Riveted to last. Connecting Bar Holder.

MADE IN USA!!"

Weight: .75 lb Width: 2" Length: 8" Depth: 3"
RUDEDOG USA 4006 - Erection Wrench & Sleever Bar Holder
Our Price: $47.00
Sale Price: $34.95
You save $12.05!
RUDEDOG USA 3011 - DOUBLE BULL PIN HOLDER WITH LEATHER STRINGS
Our Price: $47.00
Sale Price: $38.00
You save $9.00!
RUDEDOG USA 3010 - Swival Beater & Hammer Holder
The Beater Holder is just like the Pig Tail Sleever Bar Holder, Just bigger. This holder swivels, yet is low enough in gravity to not allow beater to 'spin out' while climbing around. Tunnel loop keeps it independent from spuds allowing choice of weight distribution on belt. Riveted to last. Beater not included!
MADE IN USA!!

Weight: .75 lb Width: 2" Length: 7.5" Depth: 4"

RUDEDOG USA 4006 - Erection Wrench & Sleever Bar Holder

"Up in the Northwest we call 'em frogs, down in the Southeast they call 'em sows ear or pigs ear. Many call 'em erection wrench holders or spud holders. Whatever you call 'em, we got the best on the market, now with a sleever bar holder for 3/4" or 7/8" sleever bars. Rudedog premium black leather made out of 12-13oz harness leather. Oiled for water resistance. This leather is from USA bred and raised cattle. Long lasting use.

MADE IN USA!!"
RUDEDOG USA 3011 - Double Bull Pin Holder With Leather Laced.

Lace Up Double Bullpin Holder. This Double Bullpin Holder accommodates a 10" or 13" bullpin. Constructed of heavy 12 - 13 oz Harness Leather with a tunnel loop. We make this one with Black Harness Leather, it is more resistant to wear & water and it will take longer for this one to stretch out. Fits up to a 2 1/2 inch belt. **Bullpins not Included** Made in U.S.A.

Weight: 0.7 lb Width: 3" Length: 12" Depth: 2"

******** Free Shipping Cost in USA *******
Rudedog USA - 5 Pocket Tool Pouch - #3023

Rudedog USA 5 Pocket Tool Pouch is great for Rodbusters, Lineman, Electricians, Utlities etc. Slots will accommodate up to a 3" belt. Weight: 8 oz


Made in the USA