You are here: Home > Welding Gear & Accessories > SHEETMETAL > HAND SNIPS
Find by Brand
Sort By:
Page of 3
MALCO MBH14 Magnetic Bit Holder. ******** Free Shipping Cost in US ********
Our Price: $15.00
Sale Price: $9.95
You save $5.05!

Magnetic Bit Holder

Power drive 1/4-inch hex shank fits any electric power drill or 1/4-inch power drive holder. Accepts 1/4-inch hex shank insert bits.

Catalog #DescriptionHex Opening in.Insert Dia. in. (mm)Nose Dia. in. (mm)O/A Length in. (mm)
MBH14Magnetic Bit Holder1/41/4 (6)7/16 (11)3 (76)

Made In USA
Malco RRW316 Hex Key Wrench Insert1/4" square drive shanks fit Malco RRW4 and RRW4 Ratchet Wrenches. Facilitates easy ratcheting action for servicing hard to access valves common in air condition and refrigeration condensing units. 1-5/8" long.3/16" hex

Made In USA
Malco RRW516 Hex Key Wrench Insert1/4" square drive shanks fit Malco RRW4 and RRW4 Ratchet Wrenches. Facilitates easy ratcheting action for servicing hard to access valves common in air condition and refrigeration condensing units. 1-5/8" long.5/16" hex
Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4-inch power insert shanks, meet on-the-job demands for performance and service life whether installed on an electric power drill or used with a CONNEXT Quick Change Handle. Hex Driver sizes are color coded for easy identification and are available in shorts, longs and extra long sizes. DS1C duct stretchers replacement wheels, nuts, screws( 2 Each) For Malco Duct Stretchers Tools.

Made In USA
CONNEXT Quick Change handles from Malco, combined with precision-fit and hardened Malco Magnetic Hex Chuck Driver shaft components, offer the ultimate in Hex Hand Driver durability and flexibility. Hex Hand Drivers shown here are sold pre-assembled and packaged as one product, but components are also available separately. Replacing a worn hex hand driver with just a handle or driver shaft at a time is more economical. And changing a hand-held hex driver size can be as easy and thrifty as retrieving a different size chuck driver shaft from your tool bag.
Catalog #DescriptionColor CodeHex Opening in.Insert Dia. in. (mm)Nose Dia. in. (mm)Holder Dia. in. (mm)Shaft Lgth. in. (mm)O/A Length in. (cm)Shaft Repl. #









HHD1Red1/41/4 (6)7/16 (11)11/16 (18)6-7/8 (175)10-1/2 (27)MSHXL14

Fin Straightening Tools# FST

Made In USA

The FST tool straightens commonplace 8, 10, 12, or 14 fins per inch. One-piece adjustable combs. The resilient nylon comb material will not damage the soft aluminum fins of condenser or evaporator units. Malco fin tools function by either pushing or pulling and efficiently straighten fins in tight quarters or where multiple passes over bent fins are required. Comfortable offset handles provide a sure grip and protect knuckles from scraping.

Catalog #Description
FSTFin Straightening tool for 8, 10, 12 , or 14 fins per inch

Fin Straightening Tools# FST2

Made In USA
Use the FST2 tool for straightening closely spaced 16, 18, 20, or 22 fins per inch. Both tools feature one-piece adjustable combs. The resilient nylon comb material will not damage the soft aluminum fins of condenser or evaporator units. Malco fin tools function by either pushing or pulling and efficiently straighten fins in tight quarters or where multiple passes over bent fins are required. Comfortable offset handles provide a sure grip and protect knuckles from scraping.
Catalog #Description


FST2Fin Straightening tool for 16, 18, 20 , or 22 fins per inch
Forged steel cutting blades for superior strength and durability.
Soft touch grips for maximum control and comfort.
#J1100L Journeyman snips cut 18 gauge cold rolled steel and 22 gauge stainless steel.
Replacement spring (Cat. No. P406) available.
Handle Color: red/black  Overall Length: 9-7/8''Cutting Length: 1-3/8'' (35 mm)   Cutting Pattern: left/straightSnip Type: aviation  Cutting Capacity: Cold Rolled / Stainless Steel: 18 gauge/22 gauge   Weight: 14.4 oz.
WISS Metalmaster Snips: M3R
List Price: $21.00
Our Price: $16.99
You save $4.01!
Forged steel cutting blades for superior strength and durability.
Soft touch grips for maximum control and comfort.
#J1100L Journeyman snips cut 18 gauge cold rolled steel and 22 gauge stainless steel.
Replacement spring (Cat. No. P406) available.
Handle Color: Green/black  Overall Length: 9-7/8''Cutting Length: 1-3/8'' (35 mm)   Cutting Pattern: left/straightSnip Type: aviation  Cutting Capacity: Cold Rolled / Stainless Steel: 18 gauge/22 gauge   Weight: 14.4 oz.
Forged steel cutting blades for superior strength and durability.
Soft touch grips for maximum control and comfort.
#J1100L Journeyman snips cut 18 gauge cold rolled steel and 22 gauge stainless steel.
Replacement spring (Cat. No. P406) available.
Handle Color: Yellow/black  Overall Length: 10-1/16''(255 mm) Cutting Length: 1-1/2'' (38 mm)   Cutting Pattern: Straight/ Wide Curves  Snip Type: aviation  Cutting Capacity: Cold Rolled / Stainless Steel: 18 gauge/22 gauge   Weight: 14.4 oz.
Withstands strain of cutting heavy stock and tight curves
Spring-action for fast, effortless feed
Handy hang-up hole
Non-slip, textured grips and safety latch for superior control
Length 9 3/4 in  
Cutting Direction Right, Left, & Straight  
Cutting Cap. 0.049 in [Max], 18 gauge [Max]  
Cutting Length 1 1/2 in  
Cut Type Shear Cut  
Jaw Type Serrated  
Handle Color Yellow  
Handle Type Straight  
Handle Material Steel  
Jaw Material Molybdenum Steel
WISS Metalmaster Snips: M2R
List Price: $21.00
Our Price: $16.99
You save $4.01!
WISS Metalmaster Snips: M1R (Left,Straight)
List Price: $21.00
Our Price: $16.99
You save $4.01!
Midwest Tool & Cutlery P6716L Left Cut Aviation Snip
Our Price: $24.00
Sale Price: $18.90
You save $5.10!
Withstands strain of cutting heavy stock and tight curves
Spring-action for fast, effortless feed
Handy hang-up hole
Non-slip, textured grips and safety latch for superior control
Length 9 3/4 in  
Cutting Direction Right & Straight  
Cutting Cap. 0.049 in [Max], 18 gauge [Max]  
Cutting Length 1 3/8 in  
Cut Type Shear Cut  
Jaw Type Serrated  
Handle Color Green  
Handle Type Straight  
Handle Material Steel  
Jaw Material Molybdenum Steel
Withstands strain of cutting heavy stock and tight curves
Spring-action for fast, effortless feed
Handy hang-up hole
Non-slip, textured grips and safety latch for superior control
Length 9 3/4 in  
Cutting Direction Left & Straight  
Cutting Cap. 0.049 in [Max], 18 gauge [Max]  
Cutting Length 1 3/8 in  
Cut Type Shear Cut  
Jaw Type Serrated  
Handle Color Red  
Handle Type Straight  
Handle Material Steel  
Jaw Material Molybdenum Steel
Midwest Tool and Cutlery Company provides the finest and most reliable tools for any type of job. Regular Left Cut Aviation Snip. Blades are austemper heat treated for a hardened cutting edge that outlasts all others. Hot drop forged molybdenum allow steel blades are virtually unbreakable, with long lasting edge life. Unbreakable double, overwind spring is guaranteed forever. Heavy gauge steel handles maximize force into cutting power and blades soft and durable copolymer grips will not twist or wear through. Ergonomically optimum 5.5", 140mm handle opening. Full length to point cuts up to 18 gauge CRSM or 22 gauge SSSM, with less than 80 lbs., 36 kg. of hand pressure. Blade serrations per inch 2.54CM grip without slip or scar. Grade 8 hardened center pivot bolt threaded into back blade maintains adjustment for optimum cutting.
Midwest Tool & Cutlery MW-P6716B Bulldog Aviation Snip. Made in U.S.A.
Our Price: $27.00
Sale Price: $19.00
You save $8.00!
WISS MultiMaster Snips: M300
List Price: $23.00
Our Price: $19.99
You save $3.01!
Forged steel cutting blades for superior strength and durability.
Soft touch grips for maximum control and comfort.
# J2106S snips feature exclusive Klein Kurve® handles for natural hand positioning and ease of use.
J2106S Journeyman snips cut 20 gauge cold rolled steel and 24 gauge stainless steel, with a 2-3/8'' length of cut for faster cutting.
Replacement spring (Cat. No. P406) available.
Overall Length: 10-1/2''Handle Color: Yellow/Black  Cutting Pattern: straight/wide curvesCutting   Length: 2-3/8'' (60 mm)  Snip Type: long cut offset  Cutting Capacity: Cold Rolled / Stainless Steel: 20 gauge/24 gauge   Weight: 18.2 oz.
Midwest Tool and Cutlery Company provides the finest and most reliable tools for any type of job. Compound Leverage Bulldog and Notch Cut Aviation Snip. Bulldog snips can be used in either hand for cutting straight or tight curves either left or right. Used for cutting thick sheet metal material, down to 16 gauge cold rolled steel. Provides a 7/8" cut length. Blades are hot drop forged steel. Meets or exceeds all ANSI requirements.Midwest Tool and Cutlery Company provides the finest and most reliable tools for any type of job. Compound Leverage Bulldog and Notch Cut Aviation Snip. Bulldog snips can be used in either hand for cutting straight or tight curves either left or right. Used for cutting thick sheet metal material, down to 16 gauge cold rolled steel. Provides a 7/8" cut length. Blades are hot drop forged steel. Meets or exceeds all ANSI requirements. Combines the long cut of tinners snips with the strength of compound action
Great for making long, fast cuts in sheet metal, aluminum, and much more
Compound action multiples the force of the hand by five times
Features non-slip, serrated jaws as well as non-slip textured grips
Length 10 1/2 in  
Cutting Direction Straight  
Cutting Cap. 0.035 in, 20 gauge  
Cutting Length 3 in  
Cut Type Shear Cut  
Handle Type Straight  
Handle Material Steel  
Jaw Material Molybdenum Steel
Midwest Tool P6510L Offset Left Aviation Snip. Made in U.S.A.
Our Price: $27.00
Sale Price: $20.00
You save $7.00!
MW-P6510L Offset Left Aviation Snip. Handle - Red Cuts straight and tight left curves. Easiest used in right hand. Bottom blade serrated. Meets ASME Standard B107.500-2010(B107.16). FEATURES: Nominal Length: 9-3/4" Cut Length: 1-1/4" Cutting Capacity (CR/SS): 18/22 Cuts tight left curves and straight MW-P6510R
Offset Right Aviation Snip
Cuts straight and tight right curves. Easiest used in left hand. Bottom blade serrated. Meets ASME Standard B107.500-2010(B107.16).
FEATURES:
Nominal Length: 9-3/4"
Cut Length: 1-1/4"
Cutting Capacity (CR/SS): 18/22
Cuts tight right curves and straight
Midwest Tool and Cutlery Company provides the finest and most reliable tools for any type of job. Offset Right Cut Aviation Snip. Blades are austemper heat treated for a hardened cutting edge that outlasts all others. Hot drop forged molybdenum allow steel blades are virtually unbreakable, with long lasting edge life. Unbreakable double, overwind spring is guaranteed forever. Heavy gauge steel handles maximize force into cutting power and blades soft and durable copolymer grips will not twist or wear through. Ergonomically optimum 5.5", 140mm handle opening. Full length to point cuts up to 18 gauge CRSM or 22 gauge SSSM, with less than 80 lbs., 36 kg. of hand pressure. Blade serrations per inch 2.54CM grip without slip or scar. Grade 8 hardened center pivot bolt threaded into back blade maintains adjustment for optimum cutting.
Midwest Snip Upright Left Cut Aviation P6900L
Our Price: $25.00
Sale Price: $20.50
You save $4.50!
Midwest Tool P6900R Upright Snips® Right Aviation Snip. Made in U.S.A.
Our Price: $22.00
Sale Price: $20.50
You save $1.50!
Midwest Tool MW-P6716A Power Cutter® Long-cut Aviation Snip. Made in U.S.A.
Our Price: $24.00
Sale Price: $20.50
You save $3.50!
These new ergonomic design upright snips will improve wrist range motion and make your day to day work. The unique design allows use in a variety of awkward spaces: at the waist, above the head and in tight spaces. They easily cut 24-gauge rolled steel and 28-gauge stainless steel. Capable of both push and pull motions.
MW-P6900R
Upright Snips® Right Aviation Snip

Cuts straight and tight right curves. Easiest used in left hand. Top blade serrated optimum 40 serrations per inch. Use with blades up or blades down in push or pull motion. Ideal for working in confined areas. Ergonomic design improves wrist range motion. US Patents: 519013, 520315
MW-P6716A
Power Cutter® Long-cut Aviation Snip
Cuts straight. 3-inch (76.2mm) length of cut. Use in either hand. Optimum 40 serrations per inch to both blades for secure grip of thin gauge metal and other sheet materials. Meets ASME Standard B107.500-2010(B107.16).
FEATURES:
Nominal Length: 11-1/2"
Cut Length: 3"
Cutting Capacity (CR/SS): 20/24
Cuts Straight
Midwest Tool P6510-S Straight Cut Ofset Aviation Snip.
Our Price: $27.00
Sale Price: $20.99
You save $6.01!
MALCO DS1 Straight Duct Stretchers
Our Price: $28.00
Sale Price: $21.00
You save $7.00!
WISS Metalmaster Snips: M7R
List Price: $29.00
Our Price: $22.00
You save $7.00!
Made in USA. Handles- Yellow Color Cut Straight and Wide Curves to the left & right. -Strongest hot drop forged Blades. - Ofset model flow material away from blades and keep user"s hand above sheet material making long cuts easier. - Meet or exceeds ANSI B107. 16M.

Straight Duct Stretchers# DS1

Made In USA

Use the Duct Stretcher to hold duct in place with one hand while slipping drive cleat in place with other hand. The low profile, straight body is designed to go anywhere, even in the tightest quarters. Additional spacing holes allow wheels to be adjusted to span greater distances. Rugged anodized aluminum body features large vinyl cushion grip and handy hang-up hole.

Catalog #DescriptionLength in. (mm)Net Weight oz. (g)
DS1Straight Duct Stretcher16 (406)12 (340)
Offset blades keep hands clear of metal
Withstands strain of cutting heavy stock and tight curves
Spring-action for fast, effortless feed
Handy hang-up hole
Non-slip, textured grips and safety latch for superior control
Length 9 1/4 in  
Cutting Direction Right & Straight  
Cutting Cap. 0.049 in [Max], 18 gauge [Max]  
Cutting Length 1 1/4 in  
Cut Type Shear Cut  
Jaw Type Serrated  
Handle Color Green  
Handle Type Straight  
Handle Material Steel  
Jaw Material Molybdenum Steel
WISS Metalmaster Snips: M6R
List Price: $29.00
Our Price: $22.00
You save $7.00!
WISS Metalmaster Bulldog Snips: M5R
List Price: $29.00
Our Price: $22.00
You save $7.00!
Offset blades keep hands clear of metal
Withstands strain of cutting heavy stock and tight curves
Spring-action for fast, effortless feed
Handy hang-up hole
Non-slip, textured grips and safety latch for superior control
Length 9 1/4 in  
Cutting Direction Left & Straight  
Cutting Cap. 0.049 in [Max], 18 gauge [Max]  
Cutting Length 1 1/4 in  
Cut Type Shear Cut  
Jaw Type Serrated  
Handle Color Red  
Handle Type Straight  
Handle Material Steel  
Jaw Material Molybdenum Steel
For notching or trimming extra heavy stock
Non-slip, serrated jaw made of tough molybdenum steel allows for compound lever action
Withstands strain of cutting heavy stock and tight curves
Spring-action for fast, effortless feed
Handle of high tensile strength exceeds hand power limit
Handy hang-up hole
Non-slip, textured grips and safety latch for superior control
Length 9 1/4 in  
Cutting Direction Right, Left, & Straight  
Cutting Cap. 0.650 in [Max], 16 gauge [Max]  
Cutting Length 7/8 in  
Cut Type Shear Cut  
Handle Color Red  
Handle Type Straight  
Handle Material Steel  
Jaw Material Molybdenum Steel
Forged steel cutting blades for superior strength and durability.
Soft touch grips for maximum control and comfort.
J2103S Journeyman Bulldog snips cut 16 gauge cold rolled steel and 18 gauge stainless steel.
Replacement spring (Cat. No. P406) available.
Overall Length: 9-7/16'' Handle Color: yellow/black Cutting Pattern: notch/straightCutting  Length: 7/8'' (22 mm)  Cutting Capacity: Cold Rolled / Stainless Steel: 16 gauge/18 gauge Snip   Type: bulldog    Weight: 13.9 oz.