You are here: Home > Ironworker Tools > TOOL HOLDERS > SPUD WRENCH HOLDERS
Find by Brand
Sort By:
Page of 1
RUDEDOG USA 3013 Rudedog USA Hammer Holder
Our Price: $22.00
Sale Price: $15.00
You save $7.00!
RUDEDOG USA

5012 - 'Milkers' for Pliers - Rudedog USA

****** Free Shipping Cost in US ********

New 'Milker' cushion grips soften the pliers handle that is against the palm of your hand and eases the hand strain of tying rebar.

Two milkers in each package

Made in the USA

RUDEDOG USA # 3013

Rudedog USA Hammer Holder. Made in the USA!!

Weight: 0.19lb Width: 2" Length: 4" Depth: 2.5"

Our universal hammer holder fits all size hammers. Constructed of heavy 12-13 oz Harness Leather with a tunnel loop. We make this one with Black Harness Leather, it is more resistant to wear & water and it will take longer for this one to stretch out. Conveniently fits up to a 2 1/2 inch belt.

RUDEDOG USA 5007 - Bolt-On Sleever Bar Holder
****** Free Shipping Cost in US ********


"New improved! Handmade bolt on sleever bar holder for your erection wrench holder. Redesigned with 3 (instead of 2) bolts. Bolts are 3/4" long to bolt through thicker holders. Locknuts on back. Hole is 1" for up to 7/8 sleever bars, round and hex bars.
Made in the USA!!!"
RUDEDOG USA 3014 - Rudedog USA Tool Lanyard Tether Holder
Our Price: $22.00
Sale Price: $17.00
You save $5.00!
RUDEDOG USA 3006 Spud Wrench Holder - Metal Ring

"This is our "Ring" made from Black Harness Leather. The Harness Leather is more resistant to the elements. Ideal for 1" spuds
and Adjustable Spuds! Anyone that has had to carry a 1" hard (1 5/8" opening) spud around very long realizes that most erection wrench holders are not made to handle it. Usually the holes stretch to the point that the holder isn't any good for the standard 3/4" & 7/8" spuds anymore, plus it focuses all the weight on one side of your belt. I designed this to handle the problem and allows you to wear it wherever you'd like. Just drop the spud in the ring, and be the envy of every kid on the block! Can be used with any tool that you can slide into the ring (Hammer, Beater, Adjustable Wrench). If you don't have one of these on your belt, you are missing the best tool holder out there.
Made in the USA!"
RUDEDOG USA # 3014

Rudedog USA Tool Lanyard Tether Holder. Made in the USA!!

Weight: 0.24lb Width: 1.5" Length: 6" Depth: 1"

Our tool lanyard holder holds up to six tool lanyards. Also ideal for holding a spud ratchet. Constructed of heavy 13 - 15 oz Harness Leather with a tunnel loop. We make this one with Black Harness Leather, it is more resistant to wear & water and it will take longer for this one to stretch out. Conveniently fits up to a 2 1/2 inch belt. **Lanyard not included.**

Erection Wrench Holder # 5460



Product Features
Leather construction.
Has tool-slots for two erection wrenches.
Holds Erection Wrenches and the Adjustable Head Construction Wrench (Cat. No. 3239).
Belt Connection:
Slotted
Belt Width:
Up to 2'' (50.8 mm)
Dimensions:
6'' x 8-1/2'' (152.4 mm x 215.9 mm)
Weight:
0.19 lbs. (0.08 kg)

KLEIN TOOLS

Erection Wrench Holder

KLEIN TOOLS 5459T

Erection Wrench Holder
  • Leather construction.
  • Has tool-slots for two erection wrenches.
  • Tunnel loop is riveted to assure long life.
  • Holds erection wrenches and adjustable head construction wrench Cat. No. 3239.
Pictured: 5459T
Cat. No. Belt Connection Belt Width Overall Size Weight (lbs.)
5459T tunnel up to 3-1/2" (89 mm) or to slide over D-rings, buckles, and other accessories 6" x 9-1/2"
( 152 x 241)
.32
All dimensions are in inches and (millimeters) except where indicated.

RUDEDOG USA # 3001

Single Leather Spud Wrench Holder With Tunnel Loop - Leather construction


- Tool Holders made from Black Harness Leather. The Harness Leather is more resistant to the elements.
- Tunnel loop on

Made in the USA!"

KLEIN TOOLS

Erection Wrench Holder

KLEIN TOOLS 5461T

Erection Wrench Holder
  • Cotton web tunnel loop and leather construction.
  • Holds two erection wrenches.
  • Riveted to assure long life.
  • Holds erection wrenches and adjustable head construction wrench Cat. No. 3239.
Pictured: 5461T
Cat. No. Belt Connection Belt Width Overall Size Weight (lbs.)
5461T cotton web tunnel up to 2"
(51)
6" x 10"
( 152 x 254)
.26
All dimensions are in inches and (millimeters) except where indicated.

*********** Free Shipping Cost in US **********

RUDEDOG USA 3005 - Erection Wrench Holder - Spud Wrench Holder

"Used with all Erection Wrenches. Constructed of heavy 12 - 13 oz Harness Leather with a tunnel loop. We make this one with Black Harness Leather, it is more resistant to wear & water and it will take longer for this one to stretch out. This erection wrench scabbard is great for holding the standard 3/4 spud and 7/8 spud. Tunnel loop will slide over quick release belts and any work belt up to 3" wide.

Made in the USA!!"
*********** Free Shipping Cost in US **********

RUDEDOG USA 3005 -3 Triple Erection Wrench Holder - Spud Wrench Holder. Has tool slots for three spud wrenches

"Used with all Erection Wrenches. Constructed of heavy 13 - 15 oz Harness Leather with a tunnel loop. We make this one with Black Harness Leather, it is more resistant to wear & water and it will take longer for this one to stretch out. This erection wrench scabbard is great for holding the standard 3/4 spud and 7/8 spud. Tunnel loop will slide over quick release belts and any work belt up to 3" wide.

Made in the USA!!" This erection wrench scabbard has 3 holes and is great for holding the standard spuds.

Weight: .4 lb Width: 6" Length: 9.5" Depth: 1"
RUDEDOG USA 3008 - Swival Metal Pig Tail Sleever Bar Holder ****** Best Selling *******

"We call this the 'pigtail' cuz they're built tuff. Hand crafted by Rudedog USA. This holder swivels, yet is low enough in gravity to not allow sleever to 'spin out' while climbing around. Tunnel loop keeps it independent from spuds allowing choice of weight distribution on belt. Riveted to last. Connecting Bar Holder.

MADE IN USA!!"

Weight: .75 lb Width: 2" Length: 8" Depth: 3"
RUDEDOG USA 4006 - Erection Wrench & Sleever Bar Holder
Our Price: $47.00
Sale Price: $34.95
You save $12.05!
Graber Harness 0080RUS Beamer Holder. Made in U.S.A.
Our Price: $47.00
Sale Price: $36.00
You save $11.00!
RUDEDOG USA 3010 - Swival Beater & Hammer Holder
The Beater Holder is just like the Pig Tail Sleever Bar Holder, Just bigger. This holder swivels, yet is low enough in gravity to not allow beater to 'spin out' while climbing around. Tunnel loop keeps it independent from spuds allowing choice of weight distribution on belt. Riveted to last. Beater not included!
MADE IN USA!!

Weight: .75 lb Width: 2" Length: 7.5" Depth: 4"

RUDEDOG USA 4006 - Erection Wrench & Sleever Bar Holder

"Up in the Northwest we call 'em frogs, down in the Southeast they call 'em sows ear or pigs ear. Many call 'em erection wrench holders or spud holders. Whatever you call 'em, we got the best on the market, now with a sleever bar holder for 3/4" or 7/8" sleever bars. Rudedog premium black leather made out of 12-13oz harness leather. Oiled for water resistance. This leather is from USA bred and raised cattle. Long lasting use.

MADE IN USA!!"

Made in U.S.A. An all leather Beamer holder, constructed with brass rivets and featuring a serpentine border. The holder slips easily onto any belt up to 3 1/2 inches wide. And here, you can see Mr. Graber demonstrating how to properly fit the Beamer:

RUDEDOG USA 3011 - DOUBLE BULL PIN HOLDER WITH LEATHER STRINGS
Our Price: $47.00
Sale Price: $38.00
You save $9.00!
Graber Harness 0035 Canvas and Leather Bolt Bag. Made in U.S.A.
Our Price: $49.00
Sale Price: $41.00
You save $8.00!
RUDEDOG USA 3011 - Double Bull Pin Holder With Leather Laced.

Lace Up Double Bullpin Holder. This Double Bullpin Holder accommodates a 10" or 13" bullpin. Constructed of heavy 12 - 13 oz Harness Leather with a tunnel loop. We make this one with Black Harness Leather, it is more resistant to wear & water and it will take longer for this one to stretch out. Fits up to a 2 1/2 inch belt. **Bullpins not Included** Made in U.S.A.

Weight: 0.7 lb Width: 3" Length: 12" Depth: 2"

Made in U.S.A. Graber canvas and leather bolt bag is made from no. 4 canvas with a double ply bottom Leather trim around the top gives easy access to the bolts. Cresent wrench holders on the end are made from harness leather for extra strength with leather back panel to prevent wear.

Leather Frog | Pig Ear | Spud Wrench Holder | Holster Call it what you will, we call them Bullhide Scabbards. Graber Heavy Duty Leather Spud Wrench Scabbard. Comes with 2 - 1 1/4" rings and a heavy duty snap. Made from 11/12 oz US leather and secured with copper rivets. The belt loop will take up to a 3 1/2" belt. It has been oil-dipped to insure durability. Graber Products carry a one year manufacturers warranty against defects. Dimensions: Approx. 10" long and 6 1/2" wide at its widest point.


Graber Heavy Leather Spud Wrench Scabbard. Handcrafted From 11/12 oz. US leather and assembled with copper rivets for durability. Rings are 1 1/4" stainless steel and the angle iron has a 1" hole. The belt loop will take a 3" belt. Graber Products carry a one year manufacturer's warranty against defects. Dimensions: Approx. 7 1/2" wide and 10 1/2" long.

Graber Heavy Leather Spud Wrench Scabbard. Handcrafted From 11/12 oz. US leather and assembled with copper rivets for durability. Rings are 1 1/4" stainless steel and the angle iron has a 1" hole. The belt loop will take a 3" belt. Graber Products carry a one year manufacturer's warranty against defects. Dimensions: Approx. 7 1/2" wide and 10 1/2" long.


Leather Frog | Pig Ear | Spud Wrench Holder | Holster Call it what you will, we call them Bullhide Scabbards. Graber Heavy Duty Leather Spud Wrench Scabbard. Comes with 2 - 1 1/4" rings and a heavy duty snap. Made from 11/12 oz US leather and secured with copper rivets. The belt loop will take up to a 3 1/2" belt. It has been oil-dipped to insure durability. Graber Products carry a one year manufacturers warranty against defects. Dimensions: Approx. 10" long and 6 1/2" wide at its widest point.

Graber Harness 0022Rus Leather Spud Wrench Holder with 3 Rings. Made in USA
Our Price: $59.00
Sale Price: $50.00
You save $9.00!
Graber Harness 04-0077-BK Leather Bolt Bag. Made in U.S.A.
Our Price: $110.00
Sale Price: $99.00
You save $11.00!

Made in U.S.A. Leather Frog | Pig Ear | Spud Wrench Holder | Holster

Call it what you will, we call them Bullhide Scabbards.

Graber Leather Spud Wrench Holder with Stainless Steel rings. Handcrafted from 11/12 oz Harness leather and oil dipped to provide strength and durability. Constructed with copper rivets and 1-1/2" Stainless steel rings. Graber Products carry a one year manufacturers warranty.

   * Heavy Copper Rivet Construction
   * 1-1/2" Stainless Steel Rings
   * Fits a 3" Tool Belt
   * Heavy 17oz Bullhide Leather (World's Heaviest)
   * Lifetime Repair Guarantee
   * Made in the USA



Made in U.S.A. Graber and leather bolt bag is made from genuine leather. Leather trim around the top gives easy access to the bolts. Cresent wrench holders on the end are made from harness leather for extra strength with leather back panel to prevent wear.